Sku|Product Name|Description|Product_type|Cost|Images|Buy URL
|LAMSON ARX FLY REEL|Arx is a reel built with purpose; Spey or switch casting a variety of lines with maximum line control and reliability. The continuing evolution of Spey and Scandi lines, shooting heads, flat mono, etc. demand a reel that can help prevent line snags while retaining the high performance you’ve come to expect from Waterworks Lamson. Arx has a full cage frame that encapsulates the spool to prevent line from escaping or snagging in critical areas. Normally a configuration like this would do a good job at preventing line fouling, but would preclude palming the reel. Arx is carefully milled on the bottom third of the reel to expose a functional palming section. Even the drag knob has been designed to provide optimal grip without exposing a portion of the reel to line foulingFeatures:Format: Large ArborMaterials: Machined Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltArx Specifications MODEL DIAMETER WIDTH WEIGHT CAPACITY LINE Arx 3+ 3.75? 1.2? 7.0 oz 125 yd 20# +100? 0.024? running line           +500 grain Skagit head           +10? T-9 sink tip Arx 3.5+ 4.0? 1.5? 8.80 oz 150 yd 30# +100? 0.030? running line           +640 grain Skagit head           +12? T-12 sink tip Arx 4+ 4.5? 1.5? 10.5 oz 275 yd 30# +100? 0.035? running line           +750 grain Skagit head           +18? T-17 sink tip             |Fly Reels|439.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-arx-fly-reel?variant=25313413392 |LAMSON ARX FLY REEL|Arx is a reel built with purpose; Spey or switch casting a variety of lines with maximum line control and reliability. The continuing evolution of Spey and Scandi lines, shooting heads, flat mono, etc. demand a reel that can help prevent line snags while retaining the high performance you’ve come to expect from Waterworks Lamson. Arx has a full cage frame that encapsulates the spool to prevent line from escaping or snagging in critical areas. Normally a configuration like this would do a good job at preventing line fouling, but would preclude palming the reel. Arx is carefully milled on the bottom third of the reel to expose a functional palming section. Even the drag knob has been designed to provide optimal grip without exposing a portion of the reel to line foulingFeatures:Format: Large ArborMaterials: Machined Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltArx Specifications MODEL DIAMETER WIDTH WEIGHT CAPACITY LINE Arx 3+ 3.75? 1.2? 7.0 oz 125 yd 20# +100? 0.024? running line           +500 grain Skagit head           +10? T-9 sink tip Arx 3.5+ 4.0? 1.5? 8.80 oz 150 yd 30# +100? 0.030? running line           +640 grain Skagit head           +12? T-12 sink tip Arx 4+ 4.5? 1.5? 10.5 oz 275 yd 30# +100? 0.035? running line           +750 grain Skagit head           +18? T-17 sink tip             |Fly Reels|200.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-arx-fly-reel?variant=25313413456 |LAMSON ARX FLY REEL|Arx is a reel built with purpose; Spey or switch casting a variety of lines with maximum line control and reliability. The continuing evolution of Spey and Scandi lines, shooting heads, flat mono, etc. demand a reel that can help prevent line snags while retaining the high performance you’ve come to expect from Waterworks Lamson. Arx has a full cage frame that encapsulates the spool to prevent line from escaping or snagging in critical areas. Normally a configuration like this would do a good job at preventing line fouling, but would preclude palming the reel. Arx is carefully milled on the bottom third of the reel to expose a functional palming section. Even the drag knob has been designed to provide optimal grip without exposing a portion of the reel to line foulingFeatures:Format: Large ArborMaterials: Machined Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltArx Specifications MODEL DIAMETER WIDTH WEIGHT CAPACITY LINE Arx 3+ 3.75? 1.2? 7.0 oz 125 yd 20# +100? 0.024? running line           +500 grain Skagit head           +10? T-9 sink tip Arx 3.5+ 4.0? 1.5? 8.80 oz 150 yd 30# +100? 0.030? running line           +640 grain Skagit head           +12? T-12 sink tip Arx 4+ 4.5? 1.5? 10.5 oz 275 yd 30# +100? 0.035? running line           +750 grain Skagit head           +18? T-17 sink tip             |Fly Reels|469.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-arx-fly-reel?variant=25313413520 |LAMSON ARX FLY REEL|Arx is a reel built with purpose; Spey or switch casting a variety of lines with maximum line control and reliability. The continuing evolution of Spey and Scandi lines, shooting heads, flat mono, etc. demand a reel that can help prevent line snags while retaining the high performance you’ve come to expect from Waterworks Lamson. Arx has a full cage frame that encapsulates the spool to prevent line from escaping or snagging in critical areas. Normally a configuration like this would do a good job at preventing line fouling, but would preclude palming the reel. Arx is carefully milled on the bottom third of the reel to expose a functional palming section. Even the drag knob has been designed to provide optimal grip without exposing a portion of the reel to line foulingFeatures:Format: Large ArborMaterials: Machined Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltArx Specifications MODEL DIAMETER WIDTH WEIGHT CAPACITY LINE Arx 3+ 3.75? 1.2? 7.0 oz 125 yd 20# +100? 0.024? running line           +500 grain Skagit head           +10? T-9 sink tip Arx 3.5+ 4.0? 1.5? 8.80 oz 150 yd 30# +100? 0.030? running line           +640 grain Skagit head           +12? T-12 sink tip Arx 4+ 4.5? 1.5? 10.5 oz 275 yd 30# +100? 0.035? running line           +750 grain Skagit head           +18? T-17 sink tip             |Fly Reels|210.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-arx-fly-reel?variant=25313413584 |LAMSON ARX FLY REEL|Arx is a reel built with purpose; Spey or switch casting a variety of lines with maximum line control and reliability. The continuing evolution of Spey and Scandi lines, shooting heads, flat mono, etc. demand a reel that can help prevent line snags while retaining the high performance you’ve come to expect from Waterworks Lamson. Arx has a full cage frame that encapsulates the spool to prevent line from escaping or snagging in critical areas. Normally a configuration like this would do a good job at preventing line fouling, but would preclude palming the reel. Arx is carefully milled on the bottom third of the reel to expose a functional palming section. Even the drag knob has been designed to provide optimal grip without exposing a portion of the reel to line foulingFeatures:Format: Large ArborMaterials: Machined Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltArx Specifications MODEL DIAMETER WIDTH WEIGHT CAPACITY LINE Arx 3+ 3.75? 1.2? 7.0 oz 125 yd 20# +100? 0.024? running line           +500 grain Skagit head           +10? T-9 sink tip Arx 3.5+ 4.0? 1.5? 8.80 oz 150 yd 30# +100? 0.030? running line           +640 grain Skagit head           +12? T-12 sink tip Arx 4+ 4.5? 1.5? 10.5 oz 275 yd 30# +100? 0.035? running line           +750 grain Skagit head           +18? T-17 sink tip             |Fly Reels|499.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-arx-fly-reel?variant=25313413648 |LAMSON ARX FLY REEL|Arx is a reel built with purpose; Spey or switch casting a variety of lines with maximum line control and reliability. The continuing evolution of Spey and Scandi lines, shooting heads, flat mono, etc. demand a reel that can help prevent line snags while retaining the high performance you’ve come to expect from Waterworks Lamson. Arx has a full cage frame that encapsulates the spool to prevent line from escaping or snagging in critical areas. Normally a configuration like this would do a good job at preventing line fouling, but would preclude palming the reel. Arx is carefully milled on the bottom third of the reel to expose a functional palming section. Even the drag knob has been designed to provide optimal grip without exposing a portion of the reel to line foulingFeatures:Format: Large ArborMaterials: Machined Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltArx Specifications MODEL DIAMETER WIDTH WEIGHT CAPACITY LINE Arx 3+ 3.75? 1.2? 7.0 oz 125 yd 20# +100? 0.024? running line           +500 grain Skagit head           +10? T-9 sink tip Arx 3.5+ 4.0? 1.5? 8.80 oz 150 yd 30# +100? 0.030? running line           +640 grain Skagit head           +12? T-12 sink tip Arx 4+ 4.5? 1.5? 10.5 oz 275 yd 30# +100? 0.035? running line           +750 grain Skagit head           +18? T-17 sink tip             |Fly Reels|225.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-arx-fly-reel?variant=25313413712 |LAMSON COLOR SLEEVE|Add some color to your reel! These anodized color sleeves fit over the existing cassette; customization has never been this easy. Choose from three colors: burnt orange, coral blue and salsa green. Color sleeves come in two sizes 1.5/2 and 3.5/4.**Color sleeves are compatible with Remix and Liquid reels only.|Fly Reels|9.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-color-sleeve?variant=25313414032 |LAMSON COLOR SLEEVE|Add some color to your reel! These anodized color sleeves fit over the existing cassette; customization has never been this easy. Choose from three colors: burnt orange, coral blue and salsa green. Color sleeves come in two sizes 1.5/2 and 3.5/4.**Color sleeves are compatible with Remix and Liquid reels only.|Fly Reels|9.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-color-sleeve?variant=25313414096 |LAMSON COLOR SLEEVE|Add some color to your reel! These anodized color sleeves fit over the existing cassette; customization has never been this easy. Choose from three colors: burnt orange, coral blue and salsa green. Color sleeves come in two sizes 1.5/2 and 3.5/4.**Color sleeves are compatible with Remix and Liquid reels only.|Fly Reels|9.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-color-sleeve?variant=25313414160 |LAMSON COLOR SLEEVE|Add some color to your reel! These anodized color sleeves fit over the existing cassette; customization has never been this easy. Choose from three colors: burnt orange, coral blue and salsa green. Color sleeves come in two sizes 1.5/2 and 3.5/4.**Color sleeves are compatible with Remix and Liquid reels only.|Fly Reels|9.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-color-sleeve?variant=25313414224 |LAMSON COLOR SLEEVE|Add some color to your reel! These anodized color sleeves fit over the existing cassette; customization has never been this easy. Choose from three colors: burnt orange, coral blue and salsa green. Color sleeves come in two sizes 1.5/2 and 3.5/4.**Color sleeves are compatible with Remix and Liquid reels only.|Fly Reels|9.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-color-sleeve?variant=25313414288 |LAMSON COLOR SLEEVE|Add some color to your reel! These anodized color sleeves fit over the existing cassette; customization has never been this easy. Choose from three colors: burnt orange, coral blue and salsa green. Color sleeves come in two sizes 1.5/2 and 3.5/4.**Color sleeves are compatible with Remix and Liquid reels only.|Fly Reels|9.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-color-sleeve?variant=25313414352 |LAMSON GEAR SHOWER 2.2 GAL.|The spread of aquatic species (AIS) from one body of water to another is a serious and growing ecological problem. Once an invasive species is established in new water, it can be impossible to eliminate. The method recommended by experts is to rinse gear after fishing at the take-out so that the AIS are not transported away from the site. And that’s where the Gear Shower can play a positive role. Fill the Gear Shower with tap water from home and use it to rinse away all visible material from gear at the take-out. Leave AIS behind! Let the Gear Shower make it easy.The Gear Shower is very easy to use: lower a vehicle window an inch or more and hang the shower. Tap water gravity-flows through a shower head with on/off switch, allowing for the 2.2 gallon capacity to clean boots, waders and other gear. Money from your purchase of the Gear Shower is donated to the Clean Angling Coalition. To learn more about AIS and recommended cleaning methods, visit the Clean Angling Coalition at www.cleanangling.org.Weight 3.5 lbs / Dimensions 15 x 11 x 7 in|Waders & Boots|49.95|//cdn.shopify.com/s/files/1/1017/0133/products/Screen-Shot-2014-08-25-at-10.36.56-PM_small.png?v=1480619507|https://www.tcoflyfishing.com/products/lamson-gear-shower-2-2-gal?variant=25313417232 |LAMSON GURU HD SERIES II FLY REEL|The HD in this reel stands for “Heavy Duty” and this version of Guru, unlike the standard Guru, has both a complete cage design (like the Arx) and type II finish in a pewter-tan color. Guru HD is a great affordable Saltwater and/or Spey reel. Steadfast and stylish, Guru has long set a standard as a rugged, fully USA-machined ultra-reliable reel at a great price. This season we’ve updated Guru’s spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, integrated the counterbalance and introduced a curved cross section arbor for structural stability.Guru continues to prove that the quest for “enlightenment” can be anything but boring. Features:Format: Large Arbor, Full FrameMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Type II AnodizeUS Made, Idaho BuiltGuru HD Series II Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Guru 3 HD II 3.84? 1.15? 5.05 oz 7,8 WF7 150 yds 20# Guru 3.5 HD II 4.07? 1.19? 5.97 oz 8,9 WF9 200 yds 20# Guru 4 HD II 4.48? 1.31? 7.24 oz 10,11 WF10 250 yds 30# Guru 4 II 4.41? 1.32? 7.08 oz 10,11 WF10 250 yds 30# |Fly Reels|259.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-guru-hd-series-ii-fly-reel?variant=25313416656 |LAMSON GURU HD SERIES II FLY REEL|The HD in this reel stands for “Heavy Duty” and this version of Guru, unlike the standard Guru, has both a complete cage design (like the Arx) and type II finish in a pewter-tan color. Guru HD is a great affordable Saltwater and/or Spey reel. Steadfast and stylish, Guru has long set a standard as a rugged, fully USA-machined ultra-reliable reel at a great price. This season we’ve updated Guru’s spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, integrated the counterbalance and introduced a curved cross section arbor for structural stability.Guru continues to prove that the quest for “enlightenment” can be anything but boring. Features:Format: Large Arbor, Full FrameMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Type II AnodizeUS Made, Idaho BuiltGuru HD Series II Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Guru 3 HD II 3.84? 1.15? 5.05 oz 7,8 WF7 150 yds 20# Guru 3.5 HD II 4.07? 1.19? 5.97 oz 8,9 WF9 200 yds 20# Guru 4 HD II 4.48? 1.31? 7.24 oz 10,11 WF10 250 yds 30# Guru 4 II 4.41? 1.32? 7.08 oz 10,11 WF10 250 yds 30# |Fly Reels|115.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-guru-hd-series-ii-fly-reel?variant=25313416720 |LAMSON GURU HD SERIES II FLY REEL|The HD in this reel stands for “Heavy Duty” and this version of Guru, unlike the standard Guru, has both a complete cage design (like the Arx) and type II finish in a pewter-tan color. Guru HD is a great affordable Saltwater and/or Spey reel. Steadfast and stylish, Guru has long set a standard as a rugged, fully USA-machined ultra-reliable reel at a great price. This season we’ve updated Guru’s spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, integrated the counterbalance and introduced a curved cross section arbor for structural stability.Guru continues to prove that the quest for “enlightenment” can be anything but boring. Features:Format: Large Arbor, Full FrameMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Type II AnodizeUS Made, Idaho BuiltGuru HD Series II Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Guru 3 HD II 3.84? 1.15? 5.05 oz 7,8 WF7 150 yds 20# Guru 3.5 HD II 4.07? 1.19? 5.97 oz 8,9 WF9 200 yds 20# Guru 4 HD II 4.48? 1.31? 7.24 oz 10,11 WF10 250 yds 30# Guru 4 II 4.41? 1.32? 7.08 oz 10,11 WF10 250 yds 30# |Fly Reels|279.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-guru-hd-series-ii-fly-reel?variant=25313416784 |LAMSON GURU HD SERIES II FLY REEL|The HD in this reel stands for “Heavy Duty” and this version of Guru, unlike the standard Guru, has both a complete cage design (like the Arx) and type II finish in a pewter-tan color. Guru HD is a great affordable Saltwater and/or Spey reel. Steadfast and stylish, Guru has long set a standard as a rugged, fully USA-machined ultra-reliable reel at a great price. This season we’ve updated Guru’s spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, integrated the counterbalance and introduced a curved cross section arbor for structural stability.Guru continues to prove that the quest for “enlightenment” can be anything but boring. Features:Format: Large Arbor, Full FrameMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Type II AnodizeUS Made, Idaho BuiltGuru HD Series II Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Guru 3 HD II 3.84? 1.15? 5.05 oz 7,8 WF7 150 yds 20# Guru 3.5 HD II 4.07? 1.19? 5.97 oz 8,9 WF9 200 yds 20# Guru 4 HD II 4.48? 1.31? 7.24 oz 10,11 WF10 250 yds 30# Guru 4 II 4.41? 1.32? 7.08 oz 10,11 WF10 250 yds 30# |Fly Reels|125.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-guru-hd-series-ii-fly-reel?variant=25313416848 |LAMSON GURU HD SERIES II FLY REEL|The HD in this reel stands for “Heavy Duty” and this version of Guru, unlike the standard Guru, has both a complete cage design (like the Arx) and type II finish in a pewter-tan color. Guru HD is a great affordable Saltwater and/or Spey reel. Steadfast and stylish, Guru has long set a standard as a rugged, fully USA-machined ultra-reliable reel at a great price. This season we’ve updated Guru’s spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, integrated the counterbalance and introduced a curved cross section arbor for structural stability.Guru continues to prove that the quest for “enlightenment” can be anything but boring. Features:Format: Large Arbor, Full FrameMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Type II AnodizeUS Made, Idaho BuiltGuru HD Series II Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Guru 3 HD II 3.84? 1.15? 5.05 oz 7,8 WF7 150 yds 20# Guru 3.5 HD II 4.07? 1.19? 5.97 oz 8,9 WF9 200 yds 20# Guru 4 HD II 4.48? 1.31? 7.24 oz 10,11 WF10 250 yds 30# Guru 4 II 4.41? 1.32? 7.08 oz 10,11 WF10 250 yds 30# |Fly Reels|299.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-guru-hd-series-ii-fly-reel?variant=25313416912 |LAMSON GURU HD SERIES II FLY REEL|The HD in this reel stands for “Heavy Duty” and this version of Guru, unlike the standard Guru, has both a complete cage design (like the Arx) and type II finish in a pewter-tan color. Guru HD is a great affordable Saltwater and/or Spey reel. Steadfast and stylish, Guru has long set a standard as a rugged, fully USA-machined ultra-reliable reel at a great price. This season we’ve updated Guru’s spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, integrated the counterbalance and introduced a curved cross section arbor for structural stability.Guru continues to prove that the quest for “enlightenment” can be anything but boring. Features:Format: Large Arbor, Full FrameMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Type II AnodizeUS Made, Idaho BuiltGuru HD Series II Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Guru 3 HD II 3.84? 1.15? 5.05 oz 7,8 WF7 150 yds 20# Guru 3.5 HD II 4.07? 1.19? 5.97 oz 8,9 WF9 200 yds 20# Guru 4 HD II 4.48? 1.31? 7.24 oz 10,11 WF10 250 yds 30# Guru 4 II 4.41? 1.32? 7.08 oz 10,11 WF10 250 yds 30# |Fly Reels|135.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-guru-hd-series-ii-fly-reel?variant=25313416976 |LAMSON GURU SERIES II FLY REEL|Steadfast and stylish, Guru has long set a standard as a rugged, fully USA-machined ultra-reliable reel at a great price. We updated Guru’s spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, integrated the counterbalance and introduced a curved cross section arbor for structural stability. Features: Guru continues to prove that the quest for “enlightenment” can be anything but boring.Format: Large ArborMaterials: Machined 6061 Aluminum, stainless steelFinish: Type II AnodizeDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltGuru Series II Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Guru 1 II 3.09? 0.90? 3.87 oz 2,3,4 WF3 35 yds 20# Guru 1.5 II 3.35? 1.01? 4.27 oz 3,4,5 WF4 100 yds 20# Guru 2 II 3.50? 1.00? 4.58 oz 5,6 WF6 100 yds 20# Guru 3 II 3.75? 1.15? 5.08 oz 7,8 WF7 150 yds 20# Guru 3.5 II 4.00? 1.19? 5.59 oz 8,9 WF9 200 yds 20# Guru 4 II 4.41? 1.32? 7.08 oz 10,11 WF10 250 yds 30# |Fly Reels|209.95|//cdn.shopify.com/s/files/1/1017/0133/products/Guru_Spool_small.jpg?v=1480619501|https://www.tcoflyfishing.com/products/lamson-guru-series-ii-fly-reel?variant=25313414800 |LAMSON GURU SERIES II FLY REEL|Steadfast and stylish, Guru has long set a standard as a rugged, fully USA-machined ultra-reliable reel at a great price. We updated Guru’s spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, integrated the counterbalance and introduced a curved cross section arbor for structural stability. Features: Guru continues to prove that the quest for “enlightenment” can be anything but boring.Format: Large ArborMaterials: Machined 6061 Aluminum, stainless steelFinish: Type II AnodizeDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltGuru Series II Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Guru 1 II 3.09? 0.90? 3.87 oz 2,3,4 WF3 35 yds 20# Guru 1.5 II 3.35? 1.01? 4.27 oz 3,4,5 WF4 100 yds 20# Guru 2 II 3.50? 1.00? 4.58 oz 5,6 WF6 100 yds 20# Guru 3 II 3.75? 1.15? 5.08 oz 7,8 WF7 150 yds 20# Guru 3.5 II 4.00? 1.19? 5.59 oz 8,9 WF9 200 yds 20# Guru 4 II 4.41? 1.32? 7.08 oz 10,11 WF10 250 yds 30# |Fly Reels|95.95|//cdn.shopify.com/s/files/1/1017/0133/products/Guru_Spool_small.jpg?v=1480619501|https://www.tcoflyfishing.com/products/lamson-guru-series-ii-fly-reel?variant=25313414928 |LAMSON GURU SERIES II FLY REEL|Steadfast and stylish, Guru has long set a standard as a rugged, fully USA-machined ultra-reliable reel at a great price. We updated Guru’s spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, integrated the counterbalance and introduced a curved cross section arbor for structural stability. Features: Guru continues to prove that the quest for “enlightenment” can be anything but boring.Format: Large ArborMaterials: Machined 6061 Aluminum, stainless steelFinish: Type II AnodizeDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltGuru Series II Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Guru 1 II 3.09? 0.90? 3.87 oz 2,3,4 WF3 35 yds 20# Guru 1.5 II 3.35? 1.01? 4.27 oz 3,4,5 WF4 100 yds 20# Guru 2 II 3.50? 1.00? 4.58 oz 5,6 WF6 100 yds 20# Guru 3 II 3.75? 1.15? 5.08 oz 7,8 WF7 150 yds 20# Guru 3.5 II 4.00? 1.19? 5.59 oz 8,9 WF9 200 yds 20# Guru 4 II 4.41? 1.32? 7.08 oz 10,11 WF10 250 yds 30# |Fly Reels|219.95|//cdn.shopify.com/s/files/1/1017/0133/products/Guru_Spool_small.jpg?v=1480619501|https://www.tcoflyfishing.com/products/lamson-guru-series-ii-fly-reel?variant=25313415056 |LAMSON GURU SERIES II FLY REEL|Steadfast and stylish, Guru has long set a standard as a rugged, fully USA-machined ultra-reliable reel at a great price. We updated Guru’s spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, integrated the counterbalance and introduced a curved cross section arbor for structural stability. Features: Guru continues to prove that the quest for “enlightenment” can be anything but boring.Format: Large ArborMaterials: Machined 6061 Aluminum, stainless steelFinish: Type II AnodizeDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltGuru Series II Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Guru 1 II 3.09? 0.90? 3.87 oz 2,3,4 WF3 35 yds 20# Guru 1.5 II 3.35? 1.01? 4.27 oz 3,4,5 WF4 100 yds 20# Guru 2 II 3.50? 1.00? 4.58 oz 5,6 WF6 100 yds 20# Guru 3 II 3.75? 1.15? 5.08 oz 7,8 WF7 150 yds 20# Guru 3.5 II 4.00? 1.19? 5.59 oz 8,9 WF9 200 yds 20# Guru 4 II 4.41? 1.32? 7.08 oz 10,11 WF10 250 yds 30# |Fly Reels|99.95|//cdn.shopify.com/s/files/1/1017/0133/products/Guru_Spool_small.jpg?v=1480619501|https://www.tcoflyfishing.com/products/lamson-guru-series-ii-fly-reel?variant=25313415184 |LAMSON GURU SERIES II FLY REEL|Steadfast and stylish, Guru has long set a standard as a rugged, fully USA-machined ultra-reliable reel at a great price. We updated Guru’s spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, integrated the counterbalance and introduced a curved cross section arbor for structural stability. Features: Guru continues to prove that the quest for “enlightenment” can be anything but boring.Format: Large ArborMaterials: Machined 6061 Aluminum, stainless steelFinish: Type II AnodizeDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltGuru Series II Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Guru 1 II 3.09? 0.90? 3.87 oz 2,3,4 WF3 35 yds 20# Guru 1.5 II 3.35? 1.01? 4.27 oz 3,4,5 WF4 100 yds 20# Guru 2 II 3.50? 1.00? 4.58 oz 5,6 WF6 100 yds 20# Guru 3 II 3.75? 1.15? 5.08 oz 7,8 WF7 150 yds 20# Guru 3.5 II 4.00? 1.19? 5.59 oz 8,9 WF9 200 yds 20# Guru 4 II 4.41? 1.32? 7.08 oz 10,11 WF10 250 yds 30# |Fly Reels|219.95|//cdn.shopify.com/s/files/1/1017/0133/products/Guru_Spool_small.jpg?v=1480619501|https://www.tcoflyfishing.com/products/lamson-guru-series-ii-fly-reel?variant=25313415312 |LAMSON GURU SERIES II FLY REEL|Steadfast and stylish, Guru has long set a standard as a rugged, fully USA-machined ultra-reliable reel at a great price. We updated Guru’s spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, integrated the counterbalance and introduced a curved cross section arbor for structural stability. Features: Guru continues to prove that the quest for “enlightenment” can be anything but boring.Format: Large ArborMaterials: Machined 6061 Aluminum, stainless steelFinish: Type II AnodizeDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltGuru Series II Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Guru 1 II 3.09? 0.90? 3.87 oz 2,3,4 WF3 35 yds 20# Guru 1.5 II 3.35? 1.01? 4.27 oz 3,4,5 WF4 100 yds 20# Guru 2 II 3.50? 1.00? 4.58 oz 5,6 WF6 100 yds 20# Guru 3 II 3.75? 1.15? 5.08 oz 7,8 WF7 150 yds 20# Guru 3.5 II 4.00? 1.19? 5.59 oz 8,9 WF9 200 yds 20# Guru 4 II 4.41? 1.32? 7.08 oz 10,11 WF10 250 yds 30# |Fly Reels|99.95|//cdn.shopify.com/s/files/1/1017/0133/products/Guru_Spool_small.jpg?v=1480619501|https://www.tcoflyfishing.com/products/lamson-guru-series-ii-fly-reel?variant=25313415440 |LAMSON GURU SERIES II FLY REEL|Steadfast and stylish, Guru has long set a standard as a rugged, fully USA-machined ultra-reliable reel at a great price. We updated Guru’s spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, integrated the counterbalance and introduced a curved cross section arbor for structural stability. Features: Guru continues to prove that the quest for “enlightenment” can be anything but boring.Format: Large ArborMaterials: Machined 6061 Aluminum, stainless steelFinish: Type II AnodizeDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltGuru Series II Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Guru 1 II 3.09? 0.90? 3.87 oz 2,3,4 WF3 35 yds 20# Guru 1.5 II 3.35? 1.01? 4.27 oz 3,4,5 WF4 100 yds 20# Guru 2 II 3.50? 1.00? 4.58 oz 5,6 WF6 100 yds 20# Guru 3 II 3.75? 1.15? 5.08 oz 7,8 WF7 150 yds 20# Guru 3.5 II 4.00? 1.19? 5.59 oz 8,9 WF9 200 yds 20# Guru 4 II 4.41? 1.32? 7.08 oz 10,11 WF10 250 yds 30# |Fly Reels|249.95|//cdn.shopify.com/s/files/1/1017/0133/products/Guru_Spool_small.jpg?v=1480619501|https://www.tcoflyfishing.com/products/lamson-guru-series-ii-fly-reel?variant=25313415568 |LAMSON GURU SERIES II FLY REEL|Steadfast and stylish, Guru has long set a standard as a rugged, fully USA-machined ultra-reliable reel at a great price. We updated Guru’s spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, integrated the counterbalance and introduced a curved cross section arbor for structural stability. Features: Guru continues to prove that the quest for “enlightenment” can be anything but boring.Format: Large ArborMaterials: Machined 6061 Aluminum, stainless steelFinish: Type II AnodizeDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltGuru Series II Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Guru 1 II 3.09? 0.90? 3.87 oz 2,3,4 WF3 35 yds 20# Guru 1.5 II 3.35? 1.01? 4.27 oz 3,4,5 WF4 100 yds 20# Guru 2 II 3.50? 1.00? 4.58 oz 5,6 WF6 100 yds 20# Guru 3 II 3.75? 1.15? 5.08 oz 7,8 WF7 150 yds 20# Guru 3.5 II 4.00? 1.19? 5.59 oz 8,9 WF9 200 yds 20# Guru 4 II 4.41? 1.32? 7.08 oz 10,11 WF10 250 yds 30# |Fly Reels|115.95|//cdn.shopify.com/s/files/1/1017/0133/products/Guru_Spool_small.jpg?v=1480619501|https://www.tcoflyfishing.com/products/lamson-guru-series-ii-fly-reel?variant=25313415696 |LAMSON GURU SERIES II FLY REEL|Steadfast and stylish, Guru has long set a standard as a rugged, fully USA-machined ultra-reliable reel at a great price. We updated Guru’s spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, integrated the counterbalance and introduced a curved cross section arbor for structural stability. Features: Guru continues to prove that the quest for “enlightenment” can be anything but boring.Format: Large ArborMaterials: Machined 6061 Aluminum, stainless steelFinish: Type II AnodizeDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltGuru Series II Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Guru 1 II 3.09? 0.90? 3.87 oz 2,3,4 WF3 35 yds 20# Guru 1.5 II 3.35? 1.01? 4.27 oz 3,4,5 WF4 100 yds 20# Guru 2 II 3.50? 1.00? 4.58 oz 5,6 WF6 100 yds 20# Guru 3 II 3.75? 1.15? 5.08 oz 7,8 WF7 150 yds 20# Guru 3.5 II 4.00? 1.19? 5.59 oz 8,9 WF9 200 yds 20# Guru 4 II 4.41? 1.32? 7.08 oz 10,11 WF10 250 yds 30# |Fly Reels|259.95|//cdn.shopify.com/s/files/1/1017/0133/products/Guru_Spool_small.jpg?v=1480619501|https://www.tcoflyfishing.com/products/lamson-guru-series-ii-fly-reel?variant=25313415824 |LAMSON GURU SERIES II FLY REEL|Steadfast and stylish, Guru has long set a standard as a rugged, fully USA-machined ultra-reliable reel at a great price. We updated Guru’s spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, integrated the counterbalance and introduced a curved cross section arbor for structural stability. Features: Guru continues to prove that the quest for “enlightenment” can be anything but boring.Format: Large ArborMaterials: Machined 6061 Aluminum, stainless steelFinish: Type II AnodizeDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltGuru Series II Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Guru 1 II 3.09? 0.90? 3.87 oz 2,3,4 WF3 35 yds 20# Guru 1.5 II 3.35? 1.01? 4.27 oz 3,4,5 WF4 100 yds 20# Guru 2 II 3.50? 1.00? 4.58 oz 5,6 WF6 100 yds 20# Guru 3 II 3.75? 1.15? 5.08 oz 7,8 WF7 150 yds 20# Guru 3.5 II 4.00? 1.19? 5.59 oz 8,9 WF9 200 yds 20# Guru 4 II 4.41? 1.32? 7.08 oz 10,11 WF10 250 yds 30# |Fly Reels|115.95|//cdn.shopify.com/s/files/1/1017/0133/products/Guru_Spool_small.jpg?v=1480619501|https://www.tcoflyfishing.com/products/lamson-guru-series-ii-fly-reel?variant=25313415952 |LAMSON GURU SERIES II FLY REEL|Steadfast and stylish, Guru has long set a standard as a rugged, fully USA-machined ultra-reliable reel at a great price. We updated Guru’s spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, integrated the counterbalance and introduced a curved cross section arbor for structural stability. Features: Guru continues to prove that the quest for “enlightenment” can be anything but boring.Format: Large ArborMaterials: Machined 6061 Aluminum, stainless steelFinish: Type II AnodizeDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltGuru Series II Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Guru 1 II 3.09? 0.90? 3.87 oz 2,3,4 WF3 35 yds 20# Guru 1.5 II 3.35? 1.01? 4.27 oz 3,4,5 WF4 100 yds 20# Guru 2 II 3.50? 1.00? 4.58 oz 5,6 WF6 100 yds 20# Guru 3 II 3.75? 1.15? 5.08 oz 7,8 WF7 150 yds 20# Guru 3.5 II 4.00? 1.19? 5.59 oz 8,9 WF9 200 yds 20# Guru 4 II 4.41? 1.32? 7.08 oz 10,11 WF10 250 yds 30# |Fly Reels|269.95|//cdn.shopify.com/s/files/1/1017/0133/products/Guru_Spool_small.jpg?v=1480619501|https://www.tcoflyfishing.com/products/lamson-guru-series-ii-fly-reel?variant=25313416080 |LAMSON GURU SERIES II FLY REEL|Steadfast and stylish, Guru has long set a standard as a rugged, fully USA-machined ultra-reliable reel at a great price. We updated Guru’s spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, integrated the counterbalance and introduced a curved cross section arbor for structural stability. Features: Guru continues to prove that the quest for “enlightenment” can be anything but boring.Format: Large ArborMaterials: Machined 6061 Aluminum, stainless steelFinish: Type II AnodizeDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltGuru Series II Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Guru 1 II 3.09? 0.90? 3.87 oz 2,3,4 WF3 35 yds 20# Guru 1.5 II 3.35? 1.01? 4.27 oz 3,4,5 WF4 100 yds 20# Guru 2 II 3.50? 1.00? 4.58 oz 5,6 WF6 100 yds 20# Guru 3 II 3.75? 1.15? 5.08 oz 7,8 WF7 150 yds 20# Guru 3.5 II 4.00? 1.19? 5.59 oz 8,9 WF9 200 yds 20# Guru 4 II 4.41? 1.32? 7.08 oz 10,11 WF10 250 yds 30# |Fly Reels|120.95|//cdn.shopify.com/s/files/1/1017/0133/products/Guru_Spool_small.jpg?v=1480619501|https://www.tcoflyfishing.com/products/lamson-guru-series-ii-fly-reel?variant=25313416208 |LAMSON KETCHUM RELEASE TOOL|Fish mortality can be reduced by landing the fish quickly and by avoiding netting and handling. This technique will preserve protective coatings and eliminate air exposure. The Ketchum Release® tool makes this low-mortality release easy. The tool also allows you to retrieve your fly without damage; it allows your hands to stay dry in cold weather; and it keeps hands a safe distance from toothy fish. US Patent #5,644,865The Ketchum Release® is available in three sizes.|Fly Fishing Accessories|19.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-ketchum-release-tool?variant=25313417360 |LAMSON KETCHUM RELEASE TOOL|Fish mortality can be reduced by landing the fish quickly and by avoiding netting and handling. This technique will preserve protective coatings and eliminate air exposure. The Ketchum Release® tool makes this low-mortality release easy. The tool also allows you to retrieve your fly without damage; it allows your hands to stay dry in cold weather; and it keeps hands a safe distance from toothy fish. US Patent #5,644,865The Ketchum Release® is available in three sizes.|Fly Fishing Accessories|19.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-ketchum-release-tool?variant=25313417424 |LAMSON KETCHUM RELEASE TOOL|Fish mortality can be reduced by landing the fish quickly and by avoiding netting and handling. This technique will preserve protective coatings and eliminate air exposure. The Ketchum Release® tool makes this low-mortality release easy. The tool also allows you to retrieve your fly without damage; it allows your hands to stay dry in cold weather; and it keeps hands a safe distance from toothy fish. US Patent #5,644,865The Ketchum Release® is available in three sizes.|Fly Fishing Accessories|19.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-ketchum-release-tool?variant=25313417488 |LAMSON LIQUID 3 PACK - REEL & 2 SPOOLS|Liquid reel is our newer price-point option. The Liquid offers everything you need in a fly reel at an absolute bang for your buck. The 3-pack is even more of an extreme value; it includes one reel and two spare spools in a nylon carrying case all for the price of one reel and one spool. This product offers beneficial interchangeability at ease for the multi-faceted angler.Features:Format: Large ArborMaterials: Pressure Cast Aluminum Frame and SpoolFinish: PolyurethaneDrag: Sealed Conical Drag System50% US Manufactured, 100% Idaho BuiltLiquid 3-Pack Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY LIQUID 1.5 3.34? 0.99? 4.20 oz 3,4 WF4 100 yds 20# LIQUID 2 3.61? 1.00? 4.65 oz 5,6 WF6 100 yds 20# LIQUID 3.5 3.85? 1.14? 5.20 oz 7,8 WF8 200 yds 20# LIQUID 4 4.65? 1.37? 6.70 oz 9,10 WF10 250 yds 30# |Fly Reels|159.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-liquid-3-pack-reel-2-spools?variant=25313418064 |LAMSON LIQUID 3 PACK - REEL & 2 SPOOLS|Liquid reel is our newer price-point option. The Liquid offers everything you need in a fly reel at an absolute bang for your buck. The 3-pack is even more of an extreme value; it includes one reel and two spare spools in a nylon carrying case all for the price of one reel and one spool. This product offers beneficial interchangeability at ease for the multi-faceted angler.Features:Format: Large ArborMaterials: Pressure Cast Aluminum Frame and SpoolFinish: PolyurethaneDrag: Sealed Conical Drag System50% US Manufactured, 100% Idaho BuiltLiquid 3-Pack Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY LIQUID 1.5 3.34? 0.99? 4.20 oz 3,4 WF4 100 yds 20# LIQUID 2 3.61? 1.00? 4.65 oz 5,6 WF6 100 yds 20# LIQUID 3.5 3.85? 1.14? 5.20 oz 7,8 WF8 200 yds 20# LIQUID 4 4.65? 1.37? 6.70 oz 9,10 WF10 250 yds 30# |Fly Reels|159.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-liquid-3-pack-reel-2-spools?variant=25313418128 |LAMSON LIQUID 3 PACK - REEL & 2 SPOOLS|Liquid reel is our newer price-point option. The Liquid offers everything you need in a fly reel at an absolute bang for your buck. The 3-pack is even more of an extreme value; it includes one reel and two spare spools in a nylon carrying case all for the price of one reel and one spool. This product offers beneficial interchangeability at ease for the multi-faceted angler.Features:Format: Large ArborMaterials: Pressure Cast Aluminum Frame and SpoolFinish: PolyurethaneDrag: Sealed Conical Drag System50% US Manufactured, 100% Idaho BuiltLiquid 3-Pack Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY LIQUID 1.5 3.34? 0.99? 4.20 oz 3,4 WF4 100 yds 20# LIQUID 2 3.61? 1.00? 4.65 oz 5,6 WF6 100 yds 20# LIQUID 3.5 3.85? 1.14? 5.20 oz 7,8 WF8 200 yds 20# LIQUID 4 4.65? 1.37? 6.70 oz 9,10 WF10 250 yds 30# |Fly Reels|169.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-liquid-3-pack-reel-2-spools?variant=25313418192 |LAMSON LIQUID 3 PACK - REEL & 2 SPOOLS|Liquid reel is our newer price-point option. The Liquid offers everything you need in a fly reel at an absolute bang for your buck. The 3-pack is even more of an extreme value; it includes one reel and two spare spools in a nylon carrying case all for the price of one reel and one spool. This product offers beneficial interchangeability at ease for the multi-faceted angler.Features:Format: Large ArborMaterials: Pressure Cast Aluminum Frame and SpoolFinish: PolyurethaneDrag: Sealed Conical Drag System50% US Manufactured, 100% Idaho BuiltLiquid 3-Pack Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY LIQUID 1.5 3.34? 0.99? 4.20 oz 3,4 WF4 100 yds 20# LIQUID 2 3.61? 1.00? 4.65 oz 5,6 WF6 100 yds 20# LIQUID 3.5 3.85? 1.14? 5.20 oz 7,8 WF8 200 yds 20# LIQUID 4 4.65? 1.37? 6.70 oz 9,10 WF10 250 yds 30# |Fly Reels|199.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-liquid-3-pack-reel-2-spools?variant=25313418256 |LAMSON LIQUID FLY REEL|Let’s face it, die cast reels are intended to be low cost alternatives to a machined reel, right? Imported, heavier, easier to damage, plain Jane, etc. Well . . . not necessarily. When we started creating Liquid we focused purely on the virtues and advantages a pressure-cast process can offer. Structurally you can do things with casting that you can’t machine, such as full radiused compound curves, near zero-radius inside corners, and for precise fit and finish you can go back and machine the cast part in critical areas amplifying the best aspects of the process. We pushed back on other boundaries as well. How much of a reel at this price can we make here in the U.S.? Quite a lot as it turns out, and it’s a good mix. These high quality castings are imported, but the components critical to the drag system are CNC-machined here in the U.S. Liquid reels are assembled in Boise alongside our highest priced reels. No other $100 reel can boast this much U.S. content and quality oversight. Nudging out a worthy old war horse like Konic wasn’t easy. It took a blank sheet of paper and sharp electrons. Enjoy the best of all worlds, including the best of Idaho, USA.Features:Format: Large ArborMaterials: Pressure Cast Aluminum Frame and SpoolFinish: Polyurethane Case and SpoolDrag: Sealed Conical Drag50% US Manufactured, 100% Idaho BuiltLiquid Specifications:MODELDIAMETERWIDTHWEIGHTROD WEIGHTLINEBACKING CAPACITYLIQUID 1.53.34?0.99?4.20 oz3,4WF4100 yds 20#LIQUID 23.61?1.00?4.65 oz5,6WF6100 yds 20#LIQUID 3.53.85?1.14?5.20 oz7,8WF8200 yds 20#LIQUID 44.65?1.37?6.70 oz9,10WF10250 yds 30#|Fly Reels|99.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-liquid-fly-reel?variant=25313417680 |LAMSON LIQUID FLY REEL|Let’s face it, die cast reels are intended to be low cost alternatives to a machined reel, right? Imported, heavier, easier to damage, plain Jane, etc. Well . . . not necessarily. When we started creating Liquid we focused purely on the virtues and advantages a pressure-cast process can offer. Structurally you can do things with casting that you can’t machine, such as full radiused compound curves, near zero-radius inside corners, and for precise fit and finish you can go back and machine the cast part in critical areas amplifying the best aspects of the process. We pushed back on other boundaries as well. How much of a reel at this price can we make here in the U.S.? Quite a lot as it turns out, and it’s a good mix. These high quality castings are imported, but the components critical to the drag system are CNC-machined here in the U.S. Liquid reels are assembled in Boise alongside our highest priced reels. No other $100 reel can boast this much U.S. content and quality oversight. Nudging out a worthy old war horse like Konic wasn’t easy. It took a blank sheet of paper and sharp electrons. Enjoy the best of all worlds, including the best of Idaho, USA.Features:Format: Large ArborMaterials: Pressure Cast Aluminum Frame and SpoolFinish: Polyurethane Case and SpoolDrag: Sealed Conical Drag50% US Manufactured, 100% Idaho BuiltLiquid Specifications:MODELDIAMETERWIDTHWEIGHTROD WEIGHTLINEBACKING CAPACITYLIQUID 1.53.34?0.99?4.20 oz3,4WF4100 yds 20#LIQUID 23.61?1.00?4.65 oz5,6WF6100 yds 20#LIQUID 3.53.85?1.14?5.20 oz7,8WF8200 yds 20#LIQUID 44.65?1.37?6.70 oz9,10WF10250 yds 30#|Fly Reels|99.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-liquid-fly-reel?variant=25313417744 |LAMSON LIQUID FLY REEL|Let’s face it, die cast reels are intended to be low cost alternatives to a machined reel, right? Imported, heavier, easier to damage, plain Jane, etc. Well . . . not necessarily. When we started creating Liquid we focused purely on the virtues and advantages a pressure-cast process can offer. Structurally you can do things with casting that you can’t machine, such as full radiused compound curves, near zero-radius inside corners, and for precise fit and finish you can go back and machine the cast part in critical areas amplifying the best aspects of the process. We pushed back on other boundaries as well. How much of a reel at this price can we make here in the U.S.? Quite a lot as it turns out, and it’s a good mix. These high quality castings are imported, but the components critical to the drag system are CNC-machined here in the U.S. Liquid reels are assembled in Boise alongside our highest priced reels. No other $100 reel can boast this much U.S. content and quality oversight. Nudging out a worthy old war horse like Konic wasn’t easy. It took a blank sheet of paper and sharp electrons. Enjoy the best of all worlds, including the best of Idaho, USA.Features:Format: Large ArborMaterials: Pressure Cast Aluminum Frame and SpoolFinish: Polyurethane Case and SpoolDrag: Sealed Conical Drag50% US Manufactured, 100% Idaho BuiltLiquid Specifications:MODELDIAMETERWIDTHWEIGHTROD WEIGHTLINEBACKING CAPACITYLIQUID 1.53.34?0.99?4.20 oz3,4WF4100 yds 20#LIQUID 23.61?1.00?4.65 oz5,6WF6100 yds 20#LIQUID 3.53.85?1.14?5.20 oz7,8WF8200 yds 20#LIQUID 44.65?1.37?6.70 oz9,10WF10250 yds 30#|Fly Reels|109.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-liquid-fly-reel?variant=25313417808 |LAMSON LIQUID FLY REEL|Let’s face it, die cast reels are intended to be low cost alternatives to a machined reel, right? Imported, heavier, easier to damage, plain Jane, etc. Well . . . not necessarily. When we started creating Liquid we focused purely on the virtues and advantages a pressure-cast process can offer. Structurally you can do things with casting that you can’t machine, such as full radiused compound curves, near zero-radius inside corners, and for precise fit and finish you can go back and machine the cast part in critical areas amplifying the best aspects of the process. We pushed back on other boundaries as well. How much of a reel at this price can we make here in the U.S.? Quite a lot as it turns out, and it’s a good mix. These high quality castings are imported, but the components critical to the drag system are CNC-machined here in the U.S. Liquid reels are assembled in Boise alongside our highest priced reels. No other $100 reel can boast this much U.S. content and quality oversight. Nudging out a worthy old war horse like Konic wasn’t easy. It took a blank sheet of paper and sharp electrons. Enjoy the best of all worlds, including the best of Idaho, USA.Features:Format: Large ArborMaterials: Pressure Cast Aluminum Frame and SpoolFinish: Polyurethane Case and SpoolDrag: Sealed Conical Drag50% US Manufactured, 100% Idaho BuiltLiquid Specifications:MODELDIAMETERWIDTHWEIGHTROD WEIGHTLINEBACKING CAPACITYLIQUID 1.53.34?0.99?4.20 oz3,4WF4100 yds 20#LIQUID 23.61?1.00?4.65 oz5,6WF6100 yds 20#LIQUID 3.53.85?1.14?5.20 oz7,8WF8200 yds 20#LIQUID 44.65?1.37?6.70 oz9,10WF10250 yds 30#|Fly Reels|129.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-liquid-fly-reel?variant=25313417872 |LAMSON LIQUID/REMIX SPOOL|Let’s face it, die cast reels are intended to be low cost alternatives to a machined reel, right? Imported, heavier, easier to damage, plain Jane, etc. Well . . . not necessarily. When we started creating Liquid we focused purely on the virtues and advantages a pressure-cast process can offer. Structurally you can do things with casting that you can’t machine, such as full radiused compound curves, near zero-radius inside corners, and for precise fit and finish you can go back and machine the cast part in critical areas amplifying the best aspects of the process. We pushed back on other boundaries as well. How much of a reel at this price can we make here in the U.S.? Quite a lot as it turns out, and it’s a good mix. These high quality castings are imported, but the components critical to the drag system are CNC-machined here in the U.S. Liquid reels are assembled in Boise alongside our highest priced reels. No other $100 reel can boast this much U.S. content and quality oversight. Nudging out a worthy old war horse like Konic wasn’t easy. It took a blank sheet of paper and sharp electrons. Enjoy the best of all worlds, including the best of Idaho, USA.Features:Format: Large ArborMaterials: Pressure Cast Aluminum Frame and SpoolFinish: Polyurethane Case and SpoolDrag: Sealed Conical Drag50% US Manufactured, 100% Idaho BuiltLiquid Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY LIQUID 1.5 3.34? 0.99? 4.20 oz 3,4 WF4 100 yds 20# LIQUID 2 3.61? 1.00? 4.65 oz 5,6 WF6 100 yds 20# LIQUID 3.5 3.85? 1.14? 5.20 oz 7,8 WF8 200 yds 20# LIQUID 4 4.65? 1.37? 6.70 oz 9,10 WF10 250 yds 30# |Fly Reels|45.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-liquid-remix-spool?variant=25313418512 |LAMSON LIQUID/REMIX SPOOL|Let’s face it, die cast reels are intended to be low cost alternatives to a machined reel, right? Imported, heavier, easier to damage, plain Jane, etc. Well . . . not necessarily. When we started creating Liquid we focused purely on the virtues and advantages a pressure-cast process can offer. Structurally you can do things with casting that you can’t machine, such as full radiused compound curves, near zero-radius inside corners, and for precise fit and finish you can go back and machine the cast part in critical areas amplifying the best aspects of the process. We pushed back on other boundaries as well. How much of a reel at this price can we make here in the U.S.? Quite a lot as it turns out, and it’s a good mix. These high quality castings are imported, but the components critical to the drag system are CNC-machined here in the U.S. Liquid reels are assembled in Boise alongside our highest priced reels. No other $100 reel can boast this much U.S. content and quality oversight. Nudging out a worthy old war horse like Konic wasn’t easy. It took a blank sheet of paper and sharp electrons. Enjoy the best of all worlds, including the best of Idaho, USA.Features:Format: Large ArborMaterials: Pressure Cast Aluminum Frame and SpoolFinish: Polyurethane Case and SpoolDrag: Sealed Conical Drag50% US Manufactured, 100% Idaho BuiltLiquid Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY LIQUID 1.5 3.34? 0.99? 4.20 oz 3,4 WF4 100 yds 20# LIQUID 2 3.61? 1.00? 4.65 oz 5,6 WF6 100 yds 20# LIQUID 3.5 3.85? 1.14? 5.20 oz 7,8 WF8 200 yds 20# LIQUID 4 4.65? 1.37? 6.70 oz 9,10 WF10 250 yds 30# |Fly Reels|45.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-liquid-remix-spool?variant=25313418576 |LAMSON LIQUID/REMIX SPOOL|Let’s face it, die cast reels are intended to be low cost alternatives to a machined reel, right? Imported, heavier, easier to damage, plain Jane, etc. Well . . . not necessarily. When we started creating Liquid we focused purely on the virtues and advantages a pressure-cast process can offer. Structurally you can do things with casting that you can’t machine, such as full radiused compound curves, near zero-radius inside corners, and for precise fit and finish you can go back and machine the cast part in critical areas amplifying the best aspects of the process. We pushed back on other boundaries as well. How much of a reel at this price can we make here in the U.S.? Quite a lot as it turns out, and it’s a good mix. These high quality castings are imported, but the components critical to the drag system are CNC-machined here in the U.S. Liquid reels are assembled in Boise alongside our highest priced reels. No other $100 reel can boast this much U.S. content and quality oversight. Nudging out a worthy old war horse like Konic wasn’t easy. It took a blank sheet of paper and sharp electrons. Enjoy the best of all worlds, including the best of Idaho, USA.Features:Format: Large ArborMaterials: Pressure Cast Aluminum Frame and SpoolFinish: Polyurethane Case and SpoolDrag: Sealed Conical Drag50% US Manufactured, 100% Idaho BuiltLiquid Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY LIQUID 1.5 3.34? 0.99? 4.20 oz 3,4 WF4 100 yds 20# LIQUID 2 3.61? 1.00? 4.65 oz 5,6 WF6 100 yds 20# LIQUID 3.5 3.85? 1.14? 5.20 oz 7,8 WF8 200 yds 20# LIQUID 4 4.65? 1.37? 6.70 oz 9,10 WF10 250 yds 30# |Fly Reels|50.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-liquid-remix-spool?variant=25313418640 |LAMSON LIQUID/REMIX SPOOL|Let’s face it, die cast reels are intended to be low cost alternatives to a machined reel, right? Imported, heavier, easier to damage, plain Jane, etc. Well . . . not necessarily. When we started creating Liquid we focused purely on the virtues and advantages a pressure-cast process can offer. Structurally you can do things with casting that you can’t machine, such as full radiused compound curves, near zero-radius inside corners, and for precise fit and finish you can go back and machine the cast part in critical areas amplifying the best aspects of the process. We pushed back on other boundaries as well. How much of a reel at this price can we make here in the U.S.? Quite a lot as it turns out, and it’s a good mix. These high quality castings are imported, but the components critical to the drag system are CNC-machined here in the U.S. Liquid reels are assembled in Boise alongside our highest priced reels. No other $100 reel can boast this much U.S. content and quality oversight. Nudging out a worthy old war horse like Konic wasn’t easy. It took a blank sheet of paper and sharp electrons. Enjoy the best of all worlds, including the best of Idaho, USA.Features:Format: Large ArborMaterials: Pressure Cast Aluminum Frame and SpoolFinish: Polyurethane Case and SpoolDrag: Sealed Conical Drag50% US Manufactured, 100% Idaho BuiltLiquid Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY LIQUID 1.5 3.34? 0.99? 4.20 oz 3,4 WF4 100 yds 20# LIQUID 2 3.61? 1.00? 4.65 oz 5,6 WF6 100 yds 20# LIQUID 3.5 3.85? 1.14? 5.20 oz 7,8 WF8 200 yds 20# LIQUID 4 4.65? 1.37? 6.70 oz 9,10 WF10 250 yds 30# |Fly Reels|60.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-liquid-remix-spool?variant=25313418704 |LAMSON LITESPEED MICRA-5 FLY REEL|Since Litespeed’s inception in 1998 the relationship between it and Force reels has been a constant one. Inventive ideas that first take shape in the Force have been put to work in Litespeed’s more conventional structure, which has over time resulted in one of the most successful and influential fly reels of the last two decades.We’ve learned from history, and we’re repeating it with the Generation 5 Litespeed. In 2016 we introduced design changes to the Force SL that resulted in engineering alchemy: A fly reel structure that is larger in diameter, stronger and yet lighter.By integrating the drag housing into the frame, the housing itself becomes a structural member, increasing stiffness and strength.Eliminating the cassette and the threaded overlaps reduces material and thus weight.The integrated housing is much narrower and the frame /drag unit much lighter.A narrower drag can support a narrower spool, which results in additional weight reduction.But what if the reel we’re talking about is already the lightest full drag reel in the world? Perhaps then, as a designer, you think about weight savings as money in the bank, and maybe you decide to spend it elsewhere – by increasing the overall diameter of the reel and trading weight savings into improved retrieve rate.Hence the new Litespeed: Higher retrieve rate, narrower spool for improved line handling, stiffer frame. Specific to Litespeed you’ll find enhanced 3D milling for better material distribution and an improved ergonomic drag knob for better grip.Lastly, the Gen 5 Litespeed comes clad in a revolutionary new coating called Micralox. New to fly fishing and only available on Waterworks-Lamson fly reels, Micralox is the ultimate in corrosion resistance.We invite you to meet Litespeed Micra 5. As something Yogi Berra might have said, it’s like history repeating itself all over again.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: MicraloxUS Made, Idaho BuiltLitespeed Micra 5 Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Litespeed 1.5 3.38? 0.95? 3.72 oz 3,4,5 WF 4 100 yds 20# Litespeed 2 3.63? 0.98? 4.19 oz 4,5,6 WF6 100 yds 20# Litespeed 3 3.88? 1.11? 5.08 oz 6,7,8 WF8 225 yds 20# Litespeed 3.5 4 .13? 1.15? 5.72 oz 8,9 WF9 250 yds 20# Litespeed 4 4 .63? 1.30? 8.06 oz 10,11 WF10 250 yds 30# |Fly Reels|349.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-litespeed-micra-5-fly-reel?variant=25313418832 |LAMSON LITESPEED MICRA-5 FLY REEL|Since Litespeed’s inception in 1998 the relationship between it and Force reels has been a constant one. Inventive ideas that first take shape in the Force have been put to work in Litespeed’s more conventional structure, which has over time resulted in one of the most successful and influential fly reels of the last two decades.We’ve learned from history, and we’re repeating it with the Generation 5 Litespeed. In 2016 we introduced design changes to the Force SL that resulted in engineering alchemy: A fly reel structure that is larger in diameter, stronger and yet lighter.By integrating the drag housing into the frame, the housing itself becomes a structural member, increasing stiffness and strength.Eliminating the cassette and the threaded overlaps reduces material and thus weight.The integrated housing is much narrower and the frame /drag unit much lighter.A narrower drag can support a narrower spool, which results in additional weight reduction.But what if the reel we’re talking about is already the lightest full drag reel in the world? Perhaps then, as a designer, you think about weight savings as money in the bank, and maybe you decide to spend it elsewhere – by increasing the overall diameter of the reel and trading weight savings into improved retrieve rate.Hence the new Litespeed: Higher retrieve rate, narrower spool for improved line handling, stiffer frame. Specific to Litespeed you’ll find enhanced 3D milling for better material distribution and an improved ergonomic drag knob for better grip.Lastly, the Gen 5 Litespeed comes clad in a revolutionary new coating called Micralox. New to fly fishing and only available on Waterworks-Lamson fly reels, Micralox is the ultimate in corrosion resistance.We invite you to meet Litespeed Micra 5. As something Yogi Berra might have said, it’s like history repeating itself all over again.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: MicraloxUS Made, Idaho BuiltLitespeed Micra 5 Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Litespeed 1.5 3.38? 0.95? 3.72 oz 3,4,5 WF 4 100 yds 20# Litespeed 2 3.63? 0.98? 4.19 oz 4,5,6 WF6 100 yds 20# Litespeed 3 3.88? 1.11? 5.08 oz 6,7,8 WF8 225 yds 20# Litespeed 3.5 4 .13? 1.15? 5.72 oz 8,9 WF9 250 yds 20# Litespeed 4 4 .63? 1.30? 8.06 oz 10,11 WF10 250 yds 30# |Fly Reels|150.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-litespeed-micra-5-fly-reel?variant=25313418896 |LAMSON LITESPEED MICRA-5 FLY REEL|Since Litespeed’s inception in 1998 the relationship between it and Force reels has been a constant one. Inventive ideas that first take shape in the Force have been put to work in Litespeed’s more conventional structure, which has over time resulted in one of the most successful and influential fly reels of the last two decades.We’ve learned from history, and we’re repeating it with the Generation 5 Litespeed. In 2016 we introduced design changes to the Force SL that resulted in engineering alchemy: A fly reel structure that is larger in diameter, stronger and yet lighter.By integrating the drag housing into the frame, the housing itself becomes a structural member, increasing stiffness and strength.Eliminating the cassette and the threaded overlaps reduces material and thus weight.The integrated housing is much narrower and the frame /drag unit much lighter.A narrower drag can support a narrower spool, which results in additional weight reduction.But what if the reel we’re talking about is already the lightest full drag reel in the world? Perhaps then, as a designer, you think about weight savings as money in the bank, and maybe you decide to spend it elsewhere – by increasing the overall diameter of the reel and trading weight savings into improved retrieve rate.Hence the new Litespeed: Higher retrieve rate, narrower spool for improved line handling, stiffer frame. Specific to Litespeed you’ll find enhanced 3D milling for better material distribution and an improved ergonomic drag knob for better grip.Lastly, the Gen 5 Litespeed comes clad in a revolutionary new coating called Micralox. New to fly fishing and only available on Waterworks-Lamson fly reels, Micralox is the ultimate in corrosion resistance.We invite you to meet Litespeed Micra 5. As something Yogi Berra might have said, it’s like history repeating itself all over again.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: MicraloxUS Made, Idaho BuiltLitespeed Micra 5 Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Litespeed 1.5 3.38? 0.95? 3.72 oz 3,4,5 WF 4 100 yds 20# Litespeed 2 3.63? 0.98? 4.19 oz 4,5,6 WF6 100 yds 20# Litespeed 3 3.88? 1.11? 5.08 oz 6,7,8 WF8 225 yds 20# Litespeed 3.5 4 .13? 1.15? 5.72 oz 8,9 WF9 250 yds 20# Litespeed 4 4 .63? 1.30? 8.06 oz 10,11 WF10 250 yds 30# |Fly Reels|359.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-litespeed-micra-5-fly-reel?variant=25313418960 |LAMSON LITESPEED MICRA-5 FLY REEL|Since Litespeed’s inception in 1998 the relationship between it and Force reels has been a constant one. Inventive ideas that first take shape in the Force have been put to work in Litespeed’s more conventional structure, which has over time resulted in one of the most successful and influential fly reels of the last two decades.We’ve learned from history, and we’re repeating it with the Generation 5 Litespeed. In 2016 we introduced design changes to the Force SL that resulted in engineering alchemy: A fly reel structure that is larger in diameter, stronger and yet lighter.By integrating the drag housing into the frame, the housing itself becomes a structural member, increasing stiffness and strength.Eliminating the cassette and the threaded overlaps reduces material and thus weight.The integrated housing is much narrower and the frame /drag unit much lighter.A narrower drag can support a narrower spool, which results in additional weight reduction.But what if the reel we’re talking about is already the lightest full drag reel in the world? Perhaps then, as a designer, you think about weight savings as money in the bank, and maybe you decide to spend it elsewhere – by increasing the overall diameter of the reel and trading weight savings into improved retrieve rate.Hence the new Litespeed: Higher retrieve rate, narrower spool for improved line handling, stiffer frame. Specific to Litespeed you’ll find enhanced 3D milling for better material distribution and an improved ergonomic drag knob for better grip.Lastly, the Gen 5 Litespeed comes clad in a revolutionary new coating called Micralox. New to fly fishing and only available on Waterworks-Lamson fly reels, Micralox is the ultimate in corrosion resistance.We invite you to meet Litespeed Micra 5. As something Yogi Berra might have said, it’s like history repeating itself all over again.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: MicraloxUS Made, Idaho BuiltLitespeed Micra 5 Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Litespeed 1.5 3.38? 0.95? 3.72 oz 3,4,5 WF 4 100 yds 20# Litespeed 2 3.63? 0.98? 4.19 oz 4,5,6 WF6 100 yds 20# Litespeed 3 3.88? 1.11? 5.08 oz 6,7,8 WF8 225 yds 20# Litespeed 3.5 4 .13? 1.15? 5.72 oz 8,9 WF9 250 yds 20# Litespeed 4 4 .63? 1.30? 8.06 oz 10,11 WF10 250 yds 30# |Fly Reels|160.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-litespeed-micra-5-fly-reel?variant=25313419024 |LAMSON LITESPEED MICRA-5 FLY REEL|Since Litespeed’s inception in 1998 the relationship between it and Force reels has been a constant one. Inventive ideas that first take shape in the Force have been put to work in Litespeed’s more conventional structure, which has over time resulted in one of the most successful and influential fly reels of the last two decades.We’ve learned from history, and we’re repeating it with the Generation 5 Litespeed. In 2016 we introduced design changes to the Force SL that resulted in engineering alchemy: A fly reel structure that is larger in diameter, stronger and yet lighter.By integrating the drag housing into the frame, the housing itself becomes a structural member, increasing stiffness and strength.Eliminating the cassette and the threaded overlaps reduces material and thus weight.The integrated housing is much narrower and the frame /drag unit much lighter.A narrower drag can support a narrower spool, which results in additional weight reduction.But what if the reel we’re talking about is already the lightest full drag reel in the world? Perhaps then, as a designer, you think about weight savings as money in the bank, and maybe you decide to spend it elsewhere – by increasing the overall diameter of the reel and trading weight savings into improved retrieve rate.Hence the new Litespeed: Higher retrieve rate, narrower spool for improved line handling, stiffer frame. Specific to Litespeed you’ll find enhanced 3D milling for better material distribution and an improved ergonomic drag knob for better grip.Lastly, the Gen 5 Litespeed comes clad in a revolutionary new coating called Micralox. New to fly fishing and only available on Waterworks-Lamson fly reels, Micralox is the ultimate in corrosion resistance.We invite you to meet Litespeed Micra 5. As something Yogi Berra might have said, it’s like history repeating itself all over again.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: MicraloxUS Made, Idaho BuiltLitespeed Micra 5 Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Litespeed 1.5 3.38? 0.95? 3.72 oz 3,4,5 WF 4 100 yds 20# Litespeed 2 3.63? 0.98? 4.19 oz 4,5,6 WF6 100 yds 20# Litespeed 3 3.88? 1.11? 5.08 oz 6,7,8 WF8 225 yds 20# Litespeed 3.5 4 .13? 1.15? 5.72 oz 8,9 WF9 250 yds 20# Litespeed 4 4 .63? 1.30? 8.06 oz 10,11 WF10 250 yds 30# |Fly Reels|379.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-litespeed-micra-5-fly-reel?variant=25313419088 |LAMSON LITESPEED MICRA-5 FLY REEL|Since Litespeed’s inception in 1998 the relationship between it and Force reels has been a constant one. Inventive ideas that first take shape in the Force have been put to work in Litespeed’s more conventional structure, which has over time resulted in one of the most successful and influential fly reels of the last two decades.We’ve learned from history, and we’re repeating it with the Generation 5 Litespeed. In 2016 we introduced design changes to the Force SL that resulted in engineering alchemy: A fly reel structure that is larger in diameter, stronger and yet lighter.By integrating the drag housing into the frame, the housing itself becomes a structural member, increasing stiffness and strength.Eliminating the cassette and the threaded overlaps reduces material and thus weight.The integrated housing is much narrower and the frame /drag unit much lighter.A narrower drag can support a narrower spool, which results in additional weight reduction.But what if the reel we’re talking about is already the lightest full drag reel in the world? Perhaps then, as a designer, you think about weight savings as money in the bank, and maybe you decide to spend it elsewhere – by increasing the overall diameter of the reel and trading weight savings into improved retrieve rate.Hence the new Litespeed: Higher retrieve rate, narrower spool for improved line handling, stiffer frame. Specific to Litespeed you’ll find enhanced 3D milling for better material distribution and an improved ergonomic drag knob for better grip.Lastly, the Gen 5 Litespeed comes clad in a revolutionary new coating called Micralox. New to fly fishing and only available on Waterworks-Lamson fly reels, Micralox is the ultimate in corrosion resistance.We invite you to meet Litespeed Micra 5. As something Yogi Berra might have said, it’s like history repeating itself all over again.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: MicraloxUS Made, Idaho BuiltLitespeed Micra 5 Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Litespeed 1.5 3.38? 0.95? 3.72 oz 3,4,5 WF 4 100 yds 20# Litespeed 2 3.63? 0.98? 4.19 oz 4,5,6 WF6 100 yds 20# Litespeed 3 3.88? 1.11? 5.08 oz 6,7,8 WF8 225 yds 20# Litespeed 3.5 4 .13? 1.15? 5.72 oz 8,9 WF9 250 yds 20# Litespeed 4 4 .63? 1.30? 8.06 oz 10,11 WF10 250 yds 30# |Fly Reels|169.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-litespeed-micra-5-fly-reel?variant=25313419152 |LAMSON LITESPEED MICRA-5 FLY REEL|Since Litespeed’s inception in 1998 the relationship between it and Force reels has been a constant one. Inventive ideas that first take shape in the Force have been put to work in Litespeed’s more conventional structure, which has over time resulted in one of the most successful and influential fly reels of the last two decades.We’ve learned from history, and we’re repeating it with the Generation 5 Litespeed. In 2016 we introduced design changes to the Force SL that resulted in engineering alchemy: A fly reel structure that is larger in diameter, stronger and yet lighter.By integrating the drag housing into the frame, the housing itself becomes a structural member, increasing stiffness and strength.Eliminating the cassette and the threaded overlaps reduces material and thus weight.The integrated housing is much narrower and the frame /drag unit much lighter.A narrower drag can support a narrower spool, which results in additional weight reduction.But what if the reel we’re talking about is already the lightest full drag reel in the world? Perhaps then, as a designer, you think about weight savings as money in the bank, and maybe you decide to spend it elsewhere – by increasing the overall diameter of the reel and trading weight savings into improved retrieve rate.Hence the new Litespeed: Higher retrieve rate, narrower spool for improved line handling, stiffer frame. Specific to Litespeed you’ll find enhanced 3D milling for better material distribution and an improved ergonomic drag knob for better grip.Lastly, the Gen 5 Litespeed comes clad in a revolutionary new coating called Micralox. New to fly fishing and only available on Waterworks-Lamson fly reels, Micralox is the ultimate in corrosion resistance.We invite you to meet Litespeed Micra 5. As something Yogi Berra might have said, it’s like history repeating itself all over again.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: MicraloxUS Made, Idaho BuiltLitespeed Micra 5 Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Litespeed 1.5 3.38? 0.95? 3.72 oz 3,4,5 WF 4 100 yds 20# Litespeed 2 3.63? 0.98? 4.19 oz 4,5,6 WF6 100 yds 20# Litespeed 3 3.88? 1.11? 5.08 oz 6,7,8 WF8 225 yds 20# Litespeed 3.5 4 .13? 1.15? 5.72 oz 8,9 WF9 250 yds 20# Litespeed 4 4 .63? 1.30? 8.06 oz 10,11 WF10 250 yds 30# |Fly Reels|399.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-litespeed-micra-5-fly-reel?variant=25313419216 |LAMSON LITESPEED MICRA-5 FLY REEL|Since Litespeed’s inception in 1998 the relationship between it and Force reels has been a constant one. Inventive ideas that first take shape in the Force have been put to work in Litespeed’s more conventional structure, which has over time resulted in one of the most successful and influential fly reels of the last two decades.We’ve learned from history, and we’re repeating it with the Generation 5 Litespeed. In 2016 we introduced design changes to the Force SL that resulted in engineering alchemy: A fly reel structure that is larger in diameter, stronger and yet lighter.By integrating the drag housing into the frame, the housing itself becomes a structural member, increasing stiffness and strength.Eliminating the cassette and the threaded overlaps reduces material and thus weight.The integrated housing is much narrower and the frame /drag unit much lighter.A narrower drag can support a narrower spool, which results in additional weight reduction.But what if the reel we’re talking about is already the lightest full drag reel in the world? Perhaps then, as a designer, you think about weight savings as money in the bank, and maybe you decide to spend it elsewhere – by increasing the overall diameter of the reel and trading weight savings into improved retrieve rate.Hence the new Litespeed: Higher retrieve rate, narrower spool for improved line handling, stiffer frame. Specific to Litespeed you’ll find enhanced 3D milling for better material distribution and an improved ergonomic drag knob for better grip.Lastly, the Gen 5 Litespeed comes clad in a revolutionary new coating called Micralox. New to fly fishing and only available on Waterworks-Lamson fly reels, Micralox is the ultimate in corrosion resistance.We invite you to meet Litespeed Micra 5. As something Yogi Berra might have said, it’s like history repeating itself all over again.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: MicraloxUS Made, Idaho BuiltLitespeed Micra 5 Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Litespeed 1.5 3.38? 0.95? 3.72 oz 3,4,5 WF 4 100 yds 20# Litespeed 2 3.63? 0.98? 4.19 oz 4,5,6 WF6 100 yds 20# Litespeed 3 3.88? 1.11? 5.08 oz 6,7,8 WF8 225 yds 20# Litespeed 3.5 4 .13? 1.15? 5.72 oz 8,9 WF9 250 yds 20# Litespeed 4 4 .63? 1.30? 8.06 oz 10,11 WF10 250 yds 30# |Fly Reels|179.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-litespeed-micra-5-fly-reel?variant=25313419344 |LAMSON LITESPEED MICRA-5 FLY REEL|Since Litespeed’s inception in 1998 the relationship between it and Force reels has been a constant one. Inventive ideas that first take shape in the Force have been put to work in Litespeed’s more conventional structure, which has over time resulted in one of the most successful and influential fly reels of the last two decades.We’ve learned from history, and we’re repeating it with the Generation 5 Litespeed. In 2016 we introduced design changes to the Force SL that resulted in engineering alchemy: A fly reel structure that is larger in diameter, stronger and yet lighter.By integrating the drag housing into the frame, the housing itself becomes a structural member, increasing stiffness and strength.Eliminating the cassette and the threaded overlaps reduces material and thus weight.The integrated housing is much narrower and the frame /drag unit much lighter.A narrower drag can support a narrower spool, which results in additional weight reduction.But what if the reel we’re talking about is already the lightest full drag reel in the world? Perhaps then, as a designer, you think about weight savings as money in the bank, and maybe you decide to spend it elsewhere – by increasing the overall diameter of the reel and trading weight savings into improved retrieve rate.Hence the new Litespeed: Higher retrieve rate, narrower spool for improved line handling, stiffer frame. Specific to Litespeed you’ll find enhanced 3D milling for better material distribution and an improved ergonomic drag knob for better grip.Lastly, the Gen 5 Litespeed comes clad in a revolutionary new coating called Micralox. New to fly fishing and only available on Waterworks-Lamson fly reels, Micralox is the ultimate in corrosion resistance.We invite you to meet Litespeed Micra 5. As something Yogi Berra might have said, it’s like history repeating itself all over again.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: MicraloxUS Made, Idaho BuiltLitespeed Micra 5 Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Litespeed 1.5 3.38? 0.95? 3.72 oz 3,4,5 WF 4 100 yds 20# Litespeed 2 3.63? 0.98? 4.19 oz 4,5,6 WF6 100 yds 20# Litespeed 3 3.88? 1.11? 5.08 oz 6,7,8 WF8 225 yds 20# Litespeed 3.5 4 .13? 1.15? 5.72 oz 8,9 WF9 250 yds 20# Litespeed 4 4 .63? 1.30? 8.06 oz 10,11 WF10 250 yds 30# |Fly Reels|439.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-litespeed-micra-5-fly-reel?variant=25313419408 |LAMSON LITESPEED MICRA-5 FLY REEL|Since Litespeed’s inception in 1998 the relationship between it and Force reels has been a constant one. Inventive ideas that first take shape in the Force have been put to work in Litespeed’s more conventional structure, which has over time resulted in one of the most successful and influential fly reels of the last two decades.We’ve learned from history, and we’re repeating it with the Generation 5 Litespeed. In 2016 we introduced design changes to the Force SL that resulted in engineering alchemy: A fly reel structure that is larger in diameter, stronger and yet lighter.By integrating the drag housing into the frame, the housing itself becomes a structural member, increasing stiffness and strength.Eliminating the cassette and the threaded overlaps reduces material and thus weight.The integrated housing is much narrower and the frame /drag unit much lighter.A narrower drag can support a narrower spool, which results in additional weight reduction.But what if the reel we’re talking about is already the lightest full drag reel in the world? Perhaps then, as a designer, you think about weight savings as money in the bank, and maybe you decide to spend it elsewhere – by increasing the overall diameter of the reel and trading weight savings into improved retrieve rate.Hence the new Litespeed: Higher retrieve rate, narrower spool for improved line handling, stiffer frame. Specific to Litespeed you’ll find enhanced 3D milling for better material distribution and an improved ergonomic drag knob for better grip.Lastly, the Gen 5 Litespeed comes clad in a revolutionary new coating called Micralox. New to fly fishing and only available on Waterworks-Lamson fly reels, Micralox is the ultimate in corrosion resistance.We invite you to meet Litespeed Micra 5. As something Yogi Berra might have said, it’s like history repeating itself all over again.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: MicraloxUS Made, Idaho BuiltLitespeed Micra 5 Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Litespeed 1.5 3.38? 0.95? 3.72 oz 3,4,5 WF 4 100 yds 20# Litespeed 2 3.63? 0.98? 4.19 oz 4,5,6 WF6 100 yds 20# Litespeed 3 3.88? 1.11? 5.08 oz 6,7,8 WF8 225 yds 20# Litespeed 3.5 4 .13? 1.15? 5.72 oz 8,9 WF9 250 yds 20# Litespeed 4 4 .63? 1.30? 8.06 oz 10,11 WF10 250 yds 30# |Fly Reels|195.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-litespeed-micra-5-fly-reel?variant=25313419472 |LAMSON REEL SAFE CASE SMALL|If simple is good, the Reel Safe is great. Tough plastic halves thread securely together to cradle and protect your reel in thick foam. Capable of holding any type of reel up to 4.25” in diameter (including reel foot).Fits the following reels: Waterworks reels: P1, P2, F2, F2X * Lamson reels: Litespeed 1, 1.5, 2 * Velocity 1, 1.5, 2, 3 * Guru 1.5, 2 * Radius 1.5, 2, 3, 3.5 * Konic 1.5, 2|Fly Reels|9.95|//cdn.shopify.com/s/files/1/1017/0133/products/Reel_safe_small.jpg?v=1480619515|https://www.tcoflyfishing.com/products/lamson-reel-safe-case-small?variant=25313419664 |LAMSON REMIX 3 PACK - REEL & 2 SPOOLS|New for 2016, we’ve introduced Remix in the style of 3-Pack. The 3-pack is an extreme value; it includes one reel and two spare spools in a nylon carrying case all for the price of one reel and one spool. This product offers beneficial interchangeability at ease for the multi-faceted angler.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless Steel Case | Pressure Cast AluminumSpool Finish: Type II Anodize Case | Polyurethane Spool80% US Manufactured, 100% Idaho BuiltRemix 3-Pack Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Remix 1.5 3.34? 0.99? 4.29 oz 3,4 WF4 100 yds 20# Remix 2 3.61? 1.00? 4.54 oz 5,6 WF6 100 yds 20# Remix 3.5 3.85? 1.14? 5.49 oz 7,8 WF8 200 yds 20# Remix 4 4.65? 1.37? 7.07 oz 9,10 WF10 250 yds 30# |Fly Reels|229.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-remix-3-pack-reel-2-spools?variant=25313421264 |LAMSON REMIX 3 PACK - REEL & 2 SPOOLS|New for 2016, we’ve introduced Remix in the style of 3-Pack. The 3-pack is an extreme value; it includes one reel and two spare spools in a nylon carrying case all for the price of one reel and one spool. This product offers beneficial interchangeability at ease for the multi-faceted angler.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless Steel Case | Pressure Cast AluminumSpool Finish: Type II Anodize Case | Polyurethane Spool80% US Manufactured, 100% Idaho BuiltRemix 3-Pack Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Remix 1.5 3.34? 0.99? 4.29 oz 3,4 WF4 100 yds 20# Remix 2 3.61? 1.00? 4.54 oz 5,6 WF6 100 yds 20# Remix 3.5 3.85? 1.14? 5.49 oz 7,8 WF8 200 yds 20# Remix 4 4.65? 1.37? 7.07 oz 9,10 WF10 250 yds 30# |Fly Reels|229.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-remix-3-pack-reel-2-spools?variant=25313421328 |LAMSON REMIX 3 PACK - REEL & 2 SPOOLS|New for 2016, we’ve introduced Remix in the style of 3-Pack. The 3-pack is an extreme value; it includes one reel and two spare spools in a nylon carrying case all for the price of one reel and one spool. This product offers beneficial interchangeability at ease for the multi-faceted angler.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless Steel Case | Pressure Cast AluminumSpool Finish: Type II Anodize Case | Polyurethane Spool80% US Manufactured, 100% Idaho BuiltRemix 3-Pack Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Remix 1.5 3.34? 0.99? 4.29 oz 3,4 WF4 100 yds 20# Remix 2 3.61? 1.00? 4.54 oz 5,6 WF6 100 yds 20# Remix 3.5 3.85? 1.14? 5.49 oz 7,8 WF8 200 yds 20# Remix 4 4.65? 1.37? 7.07 oz 9,10 WF10 250 yds 30# |Fly Reels|239.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-remix-3-pack-reel-2-spools?variant=25313421392 |LAMSON REMIX 3 PACK - REEL & 2 SPOOLS|New for 2016, we’ve introduced Remix in the style of 3-Pack. The 3-pack is an extreme value; it includes one reel and two spare spools in a nylon carrying case all for the price of one reel and one spool. This product offers beneficial interchangeability at ease for the multi-faceted angler.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless Steel Case | Pressure Cast AluminumSpool Finish: Type II Anodize Case | Polyurethane Spool80% US Manufactured, 100% Idaho BuiltRemix 3-Pack Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Remix 1.5 3.34? 0.99? 4.29 oz 3,4 WF4 100 yds 20# Remix 2 3.61? 1.00? 4.54 oz 5,6 WF6 100 yds 20# Remix 3.5 3.85? 1.14? 5.49 oz 7,8 WF8 200 yds 20# Remix 4 4.65? 1.37? 7.07 oz 9,10 WF10 250 yds 30# |Fly Reels|279.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-remix-3-pack-reel-2-spools?variant=25313421456 |LAMSON REMIX FLY REEL|A fusion between the free-form structures of a cast spool and the mechanical integrity of a CNC-machined case, Remix is a hybrid. The case, CNC-machined here in the U.S. from 6061 bar-stock aluminum, delivers maximum structural rigidity and durability all wrapped in a harder, brighter finish. The spool, compatible with the Liquid’s, is pressure cast with radiused compound curves, near zero-radius inside corners and a precise fit and finish. It has a U-shape arbor and narrow format to aid in line control. Remix brings together the best of CNC machining and pressure-cast technologies to deliver an unprecedented level of quality for a bit more than $150. In addition to the US-made case, all critical drag components are CNC-machined here in the U.S. And like Liquid, Remix reels are assembled in Boise by our skilled and experienced team. The result of this Remix? High performance, reliability, quality assurance and sex appeal.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless Steel Case | Pressure Cast Aluminum SpoolFinish: Type II Anodize Case| Polyurethane SpoolDrag: Sealed Conical Drag80% US Manufactured, 100% Idaho BuiltRemix Specifications:MODELDIAMETERWIDTHWEIGHTROD WEIGHTLINEBACKING CAPACITYRemix 1.53.34?0.99?4.29 oz3,4WF4100 yds 20#Remix 23.61?1.00?4.54 oz5,6WF6100 yds 20#Remix 3.53.85?1.14?5.49 oz7,8WF8200 yds 20#Remix 44.65?1.37?7.07 oz9,10WF10250 yds 30#|Fly Reels|169.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-remix-fly-reel?variant=25313420304 |LAMSON REMIX FLY REEL|A fusion between the free-form structures of a cast spool and the mechanical integrity of a CNC-machined case, Remix is a hybrid. The case, CNC-machined here in the U.S. from 6061 bar-stock aluminum, delivers maximum structural rigidity and durability all wrapped in a harder, brighter finish. The spool, compatible with the Liquid’s, is pressure cast with radiused compound curves, near zero-radius inside corners and a precise fit and finish. It has a U-shape arbor and narrow format to aid in line control. Remix brings together the best of CNC machining and pressure-cast technologies to deliver an unprecedented level of quality for a bit more than $150. In addition to the US-made case, all critical drag components are CNC-machined here in the U.S. And like Liquid, Remix reels are assembled in Boise by our skilled and experienced team. The result of this Remix? High performance, reliability, quality assurance and sex appeal.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless Steel Case | Pressure Cast Aluminum SpoolFinish: Type II Anodize Case| Polyurethane SpoolDrag: Sealed Conical Drag80% US Manufactured, 100% Idaho BuiltRemix Specifications:MODELDIAMETERWIDTHWEIGHTROD WEIGHTLINEBACKING CAPACITYRemix 1.53.34?0.99?4.29 oz3,4WF4100 yds 20#Remix 23.61?1.00?4.54 oz5,6WF6100 yds 20#Remix 3.53.85?1.14?5.49 oz7,8WF8200 yds 20#Remix 44.65?1.37?7.07 oz9,10WF10250 yds 30#|Fly Reels|169.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-remix-fly-reel?variant=25313420432 |LAMSON REMIX FLY REEL|A fusion between the free-form structures of a cast spool and the mechanical integrity of a CNC-machined case, Remix is a hybrid. The case, CNC-machined here in the U.S. from 6061 bar-stock aluminum, delivers maximum structural rigidity and durability all wrapped in a harder, brighter finish. The spool, compatible with the Liquid’s, is pressure cast with radiused compound curves, near zero-radius inside corners and a precise fit and finish. It has a U-shape arbor and narrow format to aid in line control. Remix brings together the best of CNC machining and pressure-cast technologies to deliver an unprecedented level of quality for a bit more than $150. In addition to the US-made case, all critical drag components are CNC-machined here in the U.S. And like Liquid, Remix reels are assembled in Boise by our skilled and experienced team. The result of this Remix? High performance, reliability, quality assurance and sex appeal.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless Steel Case | Pressure Cast Aluminum SpoolFinish: Type II Anodize Case| Polyurethane SpoolDrag: Sealed Conical Drag80% US Manufactured, 100% Idaho BuiltRemix Specifications:MODELDIAMETERWIDTHWEIGHTROD WEIGHTLINEBACKING CAPACITYRemix 1.53.34?0.99?4.29 oz3,4WF4100 yds 20#Remix 23.61?1.00?4.54 oz5,6WF6100 yds 20#Remix 3.53.85?1.14?5.49 oz7,8WF8200 yds 20#Remix 44.65?1.37?7.07 oz9,10WF10250 yds 30#|Fly Reels|179.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-remix-fly-reel?variant=25313420496 |LAMSON REMIX FLY REEL|A fusion between the free-form structures of a cast spool and the mechanical integrity of a CNC-machined case, Remix is a hybrid. The case, CNC-machined here in the U.S. from 6061 bar-stock aluminum, delivers maximum structural rigidity and durability all wrapped in a harder, brighter finish. The spool, compatible with the Liquid’s, is pressure cast with radiused compound curves, near zero-radius inside corners and a precise fit and finish. It has a U-shape arbor and narrow format to aid in line control. Remix brings together the best of CNC machining and pressure-cast technologies to deliver an unprecedented level of quality for a bit more than $150. In addition to the US-made case, all critical drag components are CNC-machined here in the U.S. And like Liquid, Remix reels are assembled in Boise by our skilled and experienced team. The result of this Remix? High performance, reliability, quality assurance and sex appeal.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless Steel Case | Pressure Cast Aluminum SpoolFinish: Type II Anodize Case| Polyurethane SpoolDrag: Sealed Conical Drag80% US Manufactured, 100% Idaho BuiltRemix Specifications:MODELDIAMETERWIDTHWEIGHTROD WEIGHTLINEBACKING CAPACITYRemix 1.53.34?0.99?4.29 oz3,4WF4100 yds 20#Remix 23.61?1.00?4.54 oz5,6WF6100 yds 20#Remix 3.53.85?1.14?5.49 oz7,8WF8200 yds 20#Remix 44.65?1.37?7.07 oz9,10WF10250 yds 30#|Fly Reels|199.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-remix-fly-reel?variant=25313420560 |LAMSON REMIX HD 3 PACK - REEL & 2 SPOOLS|New for 2016, we’ve introduced Remix in the style of 3-Pack. The 3-pack is an extreme value; it includes one reel and two spare spools in a nylon carrying case all for the price of one reel and one spool. This product offers beneficial interchangeability at ease for the multi-faceted angler.Features:Format: Large Arbor, Full FrameMaterials: Machined 6061 Aluminum, Stainless Steel Case| Pressure Cast Aluminum SpoolFinish: Type II Anodize Case| Polyurethane SpoolDrag: Sealed Conical Drag80% US Manufactured, 100% Idaho BuiltRemix HD 3 Pack Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Remix 3.5 HD 3.98? 1.14? 6.40 oz 7,8 WF 8 200 yds 20# Remix 4 HD 4.79? 1.37? 8.29 oz 10,11 WF10 250 yds 30# |Fly Reels|259.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-remix-hd-3-pack-reel-2-spools?variant=25313421712 |LAMSON REMIX HD 3 PACK - REEL & 2 SPOOLS|New for 2016, we’ve introduced Remix in the style of 3-Pack. The 3-pack is an extreme value; it includes one reel and two spare spools in a nylon carrying case all for the price of one reel and one spool. This product offers beneficial interchangeability at ease for the multi-faceted angler.Features:Format: Large Arbor, Full FrameMaterials: Machined 6061 Aluminum, Stainless Steel Case| Pressure Cast Aluminum SpoolFinish: Type II Anodize Case| Polyurethane SpoolDrag: Sealed Conical Drag80% US Manufactured, 100% Idaho BuiltRemix HD 3 Pack Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Remix 3.5 HD 3.98? 1.14? 6.40 oz 7,8 WF 8 200 yds 20# Remix 4 HD 4.79? 1.37? 8.29 oz 10,11 WF10 250 yds 30# |Fly Reels|299.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-remix-hd-3-pack-reel-2-spools?variant=25313421776 |LAMSON REMIX HD FLY REEL|The Remix HD reel is the “Heavy Duty” version of the Remix. This reel has a full-cage design to capture line without failure. This is a great option for an entry-level Switch, Spey, boat or all around heavier duty reel.A fusion between the free-form structures of a cast spool and the mechanical integrity of a CNC-machined case, Remix is a hybrid. The case, CNC-machined here in the U.S. from 6061 bar-stock aluminum, delivers maximum structural rigidity and durability all wrapped in a harder, brighter finish. The spool, compatible with the Liquid’s, is pressure cast with radiused compound curves, near zero-radius inside corners and a precise fit and finish. It has a U-shape arbor and narrow format to aid in line control. Remix brings together the best of CNC machining and pressure-cast technologies to deliver an unprecedented level of quality for a bit more than $150. In addition to the US-made case, all critical drag components are CNC-machined here in the U.S. And like Liquid, Remix reels are assembled in Boise by our skilled and experienced team. The result of this Remix? High performance, reliability, quality assurance and sex appeal.Features:Format: Large Arbor, Full FrameMaterials: Machined 6061 Aluminum, Stainless Steel Case| Pressure Cast Aluminum SpoolFinish: Type II Anodize Case| Polyurethane SpoolDrag: Sealed Conical Drag80% US Manufactured, 100% Idaho BuiltRemix HD Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Remix 3.5 HD 3.98? 1.14? 6.40 oz 7,8 WF 8 200 yds 20# Remix 4 HD 4.79? 1.37? 8.29 oz 10,11 WF10 250 yds 30# |Fly Reels|199.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-remix-hd-fly-reel?variant=25313420816 |LAMSON REMIX HD FLY REEL|The Remix HD reel is the “Heavy Duty” version of the Remix. This reel has a full-cage design to capture line without failure. This is a great option for an entry-level Switch, Spey, boat or all around heavier duty reel.A fusion between the free-form structures of a cast spool and the mechanical integrity of a CNC-machined case, Remix is a hybrid. The case, CNC-machined here in the U.S. from 6061 bar-stock aluminum, delivers maximum structural rigidity and durability all wrapped in a harder, brighter finish. The spool, compatible with the Liquid’s, is pressure cast with radiused compound curves, near zero-radius inside corners and a precise fit and finish. It has a U-shape arbor and narrow format to aid in line control. Remix brings together the best of CNC machining and pressure-cast technologies to deliver an unprecedented level of quality for a bit more than $150. In addition to the US-made case, all critical drag components are CNC-machined here in the U.S. And like Liquid, Remix reels are assembled in Boise by our skilled and experienced team. The result of this Remix? High performance, reliability, quality assurance and sex appeal.Features:Format: Large Arbor, Full FrameMaterials: Machined 6061 Aluminum, Stainless Steel Case| Pressure Cast Aluminum SpoolFinish: Type II Anodize Case| Polyurethane SpoolDrag: Sealed Conical Drag80% US Manufactured, 100% Idaho BuiltRemix HD Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Remix 3.5 HD 3.98? 1.14? 6.40 oz 7,8 WF 8 200 yds 20# Remix 4 HD 4.79? 1.37? 8.29 oz 10,11 WF10 250 yds 30# |Fly Reels|50.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-remix-hd-fly-reel?variant=25313420880 |LAMSON REMIX HD FLY REEL|The Remix HD reel is the “Heavy Duty” version of the Remix. This reel has a full-cage design to capture line without failure. This is a great option for an entry-level Switch, Spey, boat or all around heavier duty reel.A fusion between the free-form structures of a cast spool and the mechanical integrity of a CNC-machined case, Remix is a hybrid. The case, CNC-machined here in the U.S. from 6061 bar-stock aluminum, delivers maximum structural rigidity and durability all wrapped in a harder, brighter finish. The spool, compatible with the Liquid’s, is pressure cast with radiused compound curves, near zero-radius inside corners and a precise fit and finish. It has a U-shape arbor and narrow format to aid in line control. Remix brings together the best of CNC machining and pressure-cast technologies to deliver an unprecedented level of quality for a bit more than $150. In addition to the US-made case, all critical drag components are CNC-machined here in the U.S. And like Liquid, Remix reels are assembled in Boise by our skilled and experienced team. The result of this Remix? High performance, reliability, quality assurance and sex appeal.Features:Format: Large Arbor, Full FrameMaterials: Machined 6061 Aluminum, Stainless Steel Case| Pressure Cast Aluminum SpoolFinish: Type II Anodize Case| Polyurethane SpoolDrag: Sealed Conical Drag80% US Manufactured, 100% Idaho BuiltRemix HD Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Remix 3.5 HD 3.98? 1.14? 6.40 oz 7,8 WF 8 200 yds 20# Remix 4 HD 4.79? 1.37? 8.29 oz 10,11 WF10 250 yds 30# |Fly Reels|219.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-remix-hd-fly-reel?variant=25313420944 |LAMSON REMIX HD FLY REEL|The Remix HD reel is the “Heavy Duty” version of the Remix. This reel has a full-cage design to capture line without failure. This is a great option for an entry-level Switch, Spey, boat or all around heavier duty reel.A fusion between the free-form structures of a cast spool and the mechanical integrity of a CNC-machined case, Remix is a hybrid. The case, CNC-machined here in the U.S. from 6061 bar-stock aluminum, delivers maximum structural rigidity and durability all wrapped in a harder, brighter finish. The spool, compatible with the Liquid’s, is pressure cast with radiused compound curves, near zero-radius inside corners and a precise fit and finish. It has a U-shape arbor and narrow format to aid in line control. Remix brings together the best of CNC machining and pressure-cast technologies to deliver an unprecedented level of quality for a bit more than $150. In addition to the US-made case, all critical drag components are CNC-machined here in the U.S. And like Liquid, Remix reels are assembled in Boise by our skilled and experienced team. The result of this Remix? High performance, reliability, quality assurance and sex appeal.Features:Format: Large Arbor, Full FrameMaterials: Machined 6061 Aluminum, Stainless Steel Case| Pressure Cast Aluminum SpoolFinish: Type II Anodize Case| Polyurethane SpoolDrag: Sealed Conical Drag80% US Manufactured, 100% Idaho BuiltRemix HD Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Remix 3.5 HD 3.98? 1.14? 6.40 oz 7,8 WF 8 200 yds 20# Remix 4 HD 4.79? 1.37? 8.29 oz 10,11 WF10 250 yds 30# |Fly Reels|60.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-remix-hd-fly-reel?variant=25313421008 |LAMSON SPEEDSTER FLY REEL|The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|299.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel?variant=25313422032 |LAMSON SPEEDSTER FLY REEL|The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|140.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel?variant=25313422096 |LAMSON SPEEDSTER FLY REEL|The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|299.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel?variant=25313422160 |LAMSON SPEEDSTER FLY REEL|The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|140.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel?variant=25313422224 |LAMSON SPEEDSTER FLY REEL|The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|299.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel?variant=25313422288 |LAMSON SPEEDSTER FLY REEL|The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|140.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel?variant=25313422352 |LAMSON SPEEDSTER FLY REEL|The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|329.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel?variant=25313422416 |LAMSON SPEEDSTER FLY REEL|The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|160.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel?variant=25313422480 |LAMSON SPEEDSTER FLY REEL|The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|349.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel?variant=25313422544 |LAMSON SPEEDSTER FLY REEL|The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|170.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel?variant=25313422608 |LAMSON SPEEDSTER FLY REEL|The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|399.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel?variant=25313422672 |LAMSON SPEEDSTER FLY REEL|The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|195.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel?variant=25313422736 |LAMSON SPEEDSTER FLY REEL LIMITED EDITION|The Black Speedster is the same reel as our standard Speedster but finished in an anodized black color with orange accents. The orange accents are located on the drag knob and drag cassette to add a little extra flair.The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|299.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel-limited-edition?variant=25313752720 |LAMSON SPEEDSTER FLY REEL LIMITED EDITION|The Black Speedster is the same reel as our standard Speedster but finished in an anodized black color with orange accents. The orange accents are located on the drag knob and drag cassette to add a little extra flair.The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|140.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel-limited-edition?variant=25313752784 |LAMSON SPEEDSTER FLY REEL LIMITED EDITION|The Black Speedster is the same reel as our standard Speedster but finished in an anodized black color with orange accents. The orange accents are located on the drag knob and drag cassette to add a little extra flair.The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|299.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel-limited-edition?variant=25313752848 |LAMSON SPEEDSTER FLY REEL LIMITED EDITION|The Black Speedster is the same reel as our standard Speedster but finished in an anodized black color with orange accents. The orange accents are located on the drag knob and drag cassette to add a little extra flair.The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|140.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel-limited-edition?variant=25313752912 |LAMSON SPEEDSTER FLY REEL LIMITED EDITION|The Black Speedster is the same reel as our standard Speedster but finished in an anodized black color with orange accents. The orange accents are located on the drag knob and drag cassette to add a little extra flair.The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|299.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel-limited-edition?variant=25313752976 |LAMSON SPEEDSTER FLY REEL LIMITED EDITION|The Black Speedster is the same reel as our standard Speedster but finished in an anodized black color with orange accents. The orange accents are located on the drag knob and drag cassette to add a little extra flair.The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|140.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel-limited-edition?variant=25313753040 |LAMSON SPEEDSTER FLY REEL LIMITED EDITION|The Black Speedster is the same reel as our standard Speedster but finished in an anodized black color with orange accents. The orange accents are located on the drag knob and drag cassette to add a little extra flair.The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|329.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel-limited-edition?variant=25313753104 |LAMSON SPEEDSTER FLY REEL LIMITED EDITION|The Black Speedster is the same reel as our standard Speedster but finished in an anodized black color with orange accents. The orange accents are located on the drag knob and drag cassette to add a little extra flair.The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|160.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel-limited-edition?variant=25313753168 |LAMSON SPEEDSTER FLY REEL LIMITED EDITION|The Black Speedster is the same reel as our standard Speedster but finished in an anodized black color with orange accents. The orange accents are located on the drag knob and drag cassette to add a little extra flair.The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|349.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel-limited-edition?variant=25313753232 |LAMSON SPEEDSTER FLY REEL LIMITED EDITION|The Black Speedster is the same reel as our standard Speedster but finished in an anodized black color with orange accents. The orange accents are located on the drag knob and drag cassette to add a little extra flair.The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|170.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel-limited-edition?variant=25313753296 |LAMSON SPEEDSTER FLY REEL LIMITED EDITION|The Black Speedster is the same reel as our standard Speedster but finished in an anodized black color with orange accents. The orange accents are located on the drag knob and drag cassette to add a little extra flair.The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|399.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel-limited-edition?variant=25313753424 |LAMSON SPEEDSTER FLY REEL LIMITED EDITION|The Black Speedster is the same reel as our standard Speedster but finished in an anodized black color with orange accents. The orange accents are located on the drag knob and drag cassette to add a little extra flair.The Speedster is a super-high retrieve rate reel with a narrower spool, inboard mounted handle and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, the added circumference and inboard handle improve retrieve rate. Mate these features with our time tested smooth as silk, maintenance free drag system, classic Waterworks-Lamson styling and attention to detail, and you have what the name implies: A Hot Rod of a reel.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 1 3.10? .88? 3.40 oz 2,3,4 WF3 35 yds 20# Speedster 1.5 3.50? .95? 3.90 oz 3,4 WF4 100 yd 20# Speedster 2 3.75? .95? 4.20 oz 5,6 WF6 100 yd 20# Speedster 3 4.00? 1.05? 4.70 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 4.38? 1.15? 5.70 oz 8,9 WF9 200 yd 20# Speedster 4 4.82? 1.25? 8.50 oz 10,11 WF10 250 yds 30# |Fly Reels|195.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-fly-reel-limited-edition?variant=25313753488 |LAMSON SPEEDSTER HD FLY REEL|Speedster HD (“Heavy Duty”) follows the lead of our Arx and Guru HD reels by incorporating a full-cage design to capture line without failure. The full-cage design is the solution for thin-diameter running lines that are inclined to escape through spool/line-guard gaps. Speedster HD and Speedster have a taller and more narrow format compared to other reels in our lineup.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster HD Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 3 HD 4.00? 1.04? 5.30 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 HD 4.38? 1.07? 6.48 oz 8,9 WF9 200 yd 20# Speedster 4 HD 4.82? 1.27? 9.38 oz 10,11 WF10 250 yds 30# |Fly Reels|359.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-hd-fly-reel?variant=25313423248 |LAMSON SPEEDSTER HD FLY REEL|Speedster HD (“Heavy Duty”) follows the lead of our Arx and Guru HD reels by incorporating a full-cage design to capture line without failure. The full-cage design is the solution for thin-diameter running lines that are inclined to escape through spool/line-guard gaps. Speedster HD and Speedster have a taller and more narrow format compared to other reels in our lineup.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster HD Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 3 HD 4.00? 1.04? 5.30 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 HD 4.38? 1.07? 6.48 oz 8,9 WF9 200 yd 20# Speedster 4 HD 4.82? 1.27? 9.38 oz 10,11 WF10 250 yds 30# |Fly Reels|175.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-hd-fly-reel?variant=25313423312 |LAMSON SPEEDSTER HD FLY REEL|Speedster HD (“Heavy Duty”) follows the lead of our Arx and Guru HD reels by incorporating a full-cage design to capture line without failure. The full-cage design is the solution for thin-diameter running lines that are inclined to escape through spool/line-guard gaps. Speedster HD and Speedster have a taller and more narrow format compared to other reels in our lineup.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster HD Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 3 HD 4.00? 1.04? 5.30 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 HD 4.38? 1.07? 6.48 oz 8,9 WF9 200 yd 20# Speedster 4 HD 4.82? 1.27? 9.38 oz 10,11 WF10 250 yds 30# |Fly Reels|379.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-hd-fly-reel?variant=25313423376 |LAMSON SPEEDSTER HD FLY REEL|Speedster HD (“Heavy Duty”) follows the lead of our Arx and Guru HD reels by incorporating a full-cage design to capture line without failure. The full-cage design is the solution for thin-diameter running lines that are inclined to escape through spool/line-guard gaps. Speedster HD and Speedster have a taller and more narrow format compared to other reels in our lineup.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster HD Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 3 HD 4.00? 1.04? 5.30 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 HD 4.38? 1.07? 6.48 oz 8,9 WF9 200 yd 20# Speedster 4 HD 4.82? 1.27? 9.38 oz 10,11 WF10 250 yds 30# |Fly Reels|185.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-hd-fly-reel?variant=25313423440 |LAMSON SPEEDSTER HD FLY REEL|Speedster HD (“Heavy Duty”) follows the lead of our Arx and Guru HD reels by incorporating a full-cage design to capture line without failure. The full-cage design is the solution for thin-diameter running lines that are inclined to escape through spool/line-guard gaps. Speedster HD and Speedster have a taller and more narrow format compared to other reels in our lineup.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster HD Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 3 HD 4.00? 1.04? 5.30 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 HD 4.38? 1.07? 6.48 oz 8,9 WF9 200 yd 20# Speedster 4 HD 4.82? 1.27? 9.38 oz 10,11 WF10 250 yds 30# |Fly Reels|429.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-hd-fly-reel?variant=25313423504 |LAMSON SPEEDSTER HD FLY REEL|Speedster HD (“Heavy Duty”) follows the lead of our Arx and Guru HD reels by incorporating a full-cage design to capture line without failure. The full-cage design is the solution for thin-diameter running lines that are inclined to escape through spool/line-guard gaps. Speedster HD and Speedster have a taller and more narrow format compared to other reels in our lineup.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster HD Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 3 HD 4.00? 1.04? 5.30 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 HD 4.38? 1.07? 6.48 oz 8,9 WF9 200 yd 20# Speedster 4 HD 4.82? 1.27? 9.38 oz 10,11 WF10 250 yds 30# |Fly Reels|205.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-hd-fly-reel?variant=25313423568 |LAMSON SPEEDSTER HD FLY REEL LIMITED EDITION|Black Speedster HD is virtually the same reel as the Speedster HD, finished in a smooth black Hard Alox anodize. The orange accents highlight the drag knob and drag cassette aesthetics.Speedster HD (“Heavy Duty”) follows the lead of our Arx and Guru HD reels by incorporating a full-cage design to capture line without failure. The full-cage design is the solution for thin-diameter running lines that are inclined to escape through spool/line-guard gaps. Speedster HD and Speedster have a taller and more narrow format compared to other reels in our lineup.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster HD Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 3 HD 4.00? 1.04? 5.30 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 HD 4.38? 1.07? 6.48 oz 8,9 WF9 200 yd 20# Speedster 4 HD 4.82? 1.27? 9.38 oz 10,11 WF10 250 yds 30# |Fly Reels|359.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-hd-fly-reel-limited-edition?variant=25313756112 |LAMSON SPEEDSTER HD FLY REEL LIMITED EDITION|Black Speedster HD is virtually the same reel as the Speedster HD, finished in a smooth black Hard Alox anodize. The orange accents highlight the drag knob and drag cassette aesthetics.Speedster HD (“Heavy Duty”) follows the lead of our Arx and Guru HD reels by incorporating a full-cage design to capture line without failure. The full-cage design is the solution for thin-diameter running lines that are inclined to escape through spool/line-guard gaps. Speedster HD and Speedster have a taller and more narrow format compared to other reels in our lineup.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster HD Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 3 HD 4.00? 1.04? 5.30 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 HD 4.38? 1.07? 6.48 oz 8,9 WF9 200 yd 20# Speedster 4 HD 4.82? 1.27? 9.38 oz 10,11 WF10 250 yds 30# |Fly Reels|175.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-hd-fly-reel-limited-edition?variant=25313756240 |LAMSON SPEEDSTER HD FLY REEL LIMITED EDITION|Black Speedster HD is virtually the same reel as the Speedster HD, finished in a smooth black Hard Alox anodize. The orange accents highlight the drag knob and drag cassette aesthetics.Speedster HD (“Heavy Duty”) follows the lead of our Arx and Guru HD reels by incorporating a full-cage design to capture line without failure. The full-cage design is the solution for thin-diameter running lines that are inclined to escape through spool/line-guard gaps. Speedster HD and Speedster have a taller and more narrow format compared to other reels in our lineup.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster HD Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 3 HD 4.00? 1.04? 5.30 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 HD 4.38? 1.07? 6.48 oz 8,9 WF9 200 yd 20# Speedster 4 HD 4.82? 1.27? 9.38 oz 10,11 WF10 250 yds 30# |Fly Reels|379.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-hd-fly-reel-limited-edition?variant=25313756304 |LAMSON SPEEDSTER HD FLY REEL LIMITED EDITION|Black Speedster HD is virtually the same reel as the Speedster HD, finished in a smooth black Hard Alox anodize. The orange accents highlight the drag knob and drag cassette aesthetics.Speedster HD (“Heavy Duty”) follows the lead of our Arx and Guru HD reels by incorporating a full-cage design to capture line without failure. The full-cage design is the solution for thin-diameter running lines that are inclined to escape through spool/line-guard gaps. Speedster HD and Speedster have a taller and more narrow format compared to other reels in our lineup.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster HD Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 3 HD 4.00? 1.04? 5.30 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 HD 4.38? 1.07? 6.48 oz 8,9 WF9 200 yd 20# Speedster 4 HD 4.82? 1.27? 9.38 oz 10,11 WF10 250 yds 30# |Fly Reels|185.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-hd-fly-reel-limited-edition?variant=25313756432 |LAMSON SPEEDSTER HD FLY REEL LIMITED EDITION|Black Speedster HD is virtually the same reel as the Speedster HD, finished in a smooth black Hard Alox anodize. The orange accents highlight the drag knob and drag cassette aesthetics.Speedster HD (“Heavy Duty”) follows the lead of our Arx and Guru HD reels by incorporating a full-cage design to capture line without failure. The full-cage design is the solution for thin-diameter running lines that are inclined to escape through spool/line-guard gaps. Speedster HD and Speedster have a taller and more narrow format compared to other reels in our lineup.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster HD Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 3 HD 4.00? 1.04? 5.30 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 HD 4.38? 1.07? 6.48 oz 8,9 WF9 200 yd 20# Speedster 4 HD 4.82? 1.27? 9.38 oz 10,11 WF10 250 yds 30# |Fly Reels|429.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-hd-fly-reel-limited-edition?variant=25313756560 |LAMSON SPEEDSTER HD FLY REEL LIMITED EDITION|Black Speedster HD is virtually the same reel as the Speedster HD, finished in a smooth black Hard Alox anodize. The orange accents highlight the drag knob and drag cassette aesthetics.Speedster HD (“Heavy Duty”) follows the lead of our Arx and Guru HD reels by incorporating a full-cage design to capture line without failure. The full-cage design is the solution for thin-diameter running lines that are inclined to escape through spool/line-guard gaps. Speedster HD and Speedster have a taller and more narrow format compared to other reels in our lineup.Features:Format: Super ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical DragUS Made, Idaho BuiltSpeedster HD Specifications: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Speedster 3 HD 4.00? 1.04? 5.30 oz 6,7,8 WF7 150 yd 20# Speedster 3.5 HD 4.38? 1.07? 6.48 oz 8,9 WF9 200 yd 20# Speedster 4 HD 4.82? 1.27? 9.38 oz 10,11 WF10 250 yds 30# |Fly Reels|205.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-speedster-hd-fly-reel-limited-edition?variant=25313756688 |LAMSON STRIPPER GLOVE|We saw a need for a high quality glove that could provide sun protection and that could protect from the cuts and abrasions of stripping line. Our Stripper Glove protects the first and second fingers from stripping abrasions with a durable four-way stretch material.|Mens Socks Hats & Gloves|9.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-stripper-glove?variant=25313423952 |LAMSON STRIPPER GLOVE|We saw a need for a high quality glove that could provide sun protection and that could protect from the cuts and abrasions of stripping line. Our Stripper Glove protects the first and second fingers from stripping abrasions with a durable four-way stretch material.|Mens Socks Hats & Gloves|9.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-stripper-glove?variant=25313424016 |LAMSON STRIPPER GLOVE|We saw a need for a high quality glove that could provide sun protection and that could protect from the cuts and abrasions of stripping line. Our Stripper Glove protects the first and second fingers from stripping abrasions with a durable four-way stretch material.|Mens Socks Hats & Gloves|9.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-stripper-glove?variant=25313424080 |LAMSON STRIPPER GLOVE|We saw a need for a high quality glove that could provide sun protection and that could protect from the cuts and abrasions of stripping line. Our Stripper Glove protects the first and second fingers from stripping abrasions with a durable four-way stretch material.|Mens Socks Hats & Gloves|9.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-stripper-glove?variant=25313424144 |LAMSON STRIPPER GLOVE|We saw a need for a high quality glove that could provide sun protection and that could protect from the cuts and abrasions of stripping line. Our Stripper Glove protects the first and second fingers from stripping abrasions with a durable four-way stretch material.|Mens Socks Hats & Gloves|9.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-stripper-glove?variant=25313424208 |LAMSON STRIPPER GLOVE|We saw a need for a high quality glove that could provide sun protection and that could protect from the cuts and abrasions of stripping line. Our Stripper Glove protects the first and second fingers from stripping abrasions with a durable four-way stretch material.|Mens Socks Hats & Gloves|9.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-stripper-glove?variant=25313424272 |LAMSON STRIPPER GLOVE|We saw a need for a high quality glove that could provide sun protection and that could protect from the cuts and abrasions of stripping line. Our Stripper Glove protects the first and second fingers from stripping abrasions with a durable four-way stretch material.|Mens Socks Hats & Gloves|9.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-stripper-glove?variant=25313424336 |LAMSON STRIPPER GLOVE|We saw a need for a high quality glove that could provide sun protection and that could protect from the cuts and abrasions of stripping line. Our Stripper Glove protects the first and second fingers from stripping abrasions with a durable four-way stretch material.|Mens Socks Hats & Gloves|9.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-stripper-glove?variant=25313424400 |LAMSON WATERWORKS FORCE SL SERIES II FLY REEL|The evolution of Force Superlight reels arrives with a new line storage format, enhanced CNC machined structural development and more fluid, refined styling. The Force reels have, since the introduction in 1997, pursued what we feel is the Holy Grail of fly reel performance: delivering the highest possible ratio of retrieve rate to reel weight. To this end, while other super arbor reels add weight in order to gain speed, Force reels maintain their featherweight specification by being pure muscle and bone.Force SL II has an integrated foot, frame and drag cassette. The integration of the cassette to the frame and foot creates more strength and durability in the reel overall and less weight with fewer added parts.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltForce SL Series II Specs: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Force 1 SL Series II 3.80? 0.95? 2.82 oz 2,3,4 WF4 150 yds 20# Force 2 SL Series II 4.10? 1.00? 3.31 oz 5,6 WF6 125 yds 20# Force 3 SL Series II 4.40? 1.28? 3.70 oz 6,7,8 WF8 200 yds 20# |Fly Reels|499.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-waterworks-force-sl-series-ii-fly-reel?variant=25313424656 |LAMSON WATERWORKS FORCE SL SERIES II FLY REEL|The evolution of Force Superlight reels arrives with a new line storage format, enhanced CNC machined structural development and more fluid, refined styling. The Force reels have, since the introduction in 1997, pursued what we feel is the Holy Grail of fly reel performance: delivering the highest possible ratio of retrieve rate to reel weight. To this end, while other super arbor reels add weight in order to gain speed, Force reels maintain their featherweight specification by being pure muscle and bone.Force SL II has an integrated foot, frame and drag cassette. The integration of the cassette to the frame and foot creates more strength and durability in the reel overall and less weight with fewer added parts.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltForce SL Series II Specs: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Force 1 SL Series II 3.80? 0.95? 2.82 oz 2,3,4 WF4 150 yds 20# Force 2 SL Series II 4.10? 1.00? 3.31 oz 5,6 WF6 125 yds 20# Force 3 SL Series II 4.40? 1.28? 3.70 oz 6,7,8 WF8 200 yds 20# |Fly Reels|219.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-waterworks-force-sl-series-ii-fly-reel?variant=25313424720 |LAMSON WATERWORKS FORCE SL SERIES II FLY REEL|The evolution of Force Superlight reels arrives with a new line storage format, enhanced CNC machined structural development and more fluid, refined styling. The Force reels have, since the introduction in 1997, pursued what we feel is the Holy Grail of fly reel performance: delivering the highest possible ratio of retrieve rate to reel weight. To this end, while other super arbor reels add weight in order to gain speed, Force reels maintain their featherweight specification by being pure muscle and bone.Force SL II has an integrated foot, frame and drag cassette. The integration of the cassette to the frame and foot creates more strength and durability in the reel overall and less weight with fewer added parts.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltForce SL Series II Specs: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Force 1 SL Series II 3.80? 0.95? 2.82 oz 2,3,4 WF4 150 yds 20# Force 2 SL Series II 4.10? 1.00? 3.31 oz 5,6 WF6 125 yds 20# Force 3 SL Series II 4.40? 1.28? 3.70 oz 6,7,8 WF8 200 yds 20# |Fly Reels|499.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-waterworks-force-sl-series-ii-fly-reel?variant=25313424784 |LAMSON WATERWORKS FORCE SL SERIES II FLY REEL|The evolution of Force Superlight reels arrives with a new line storage format, enhanced CNC machined structural development and more fluid, refined styling. The Force reels have, since the introduction in 1997, pursued what we feel is the Holy Grail of fly reel performance: delivering the highest possible ratio of retrieve rate to reel weight. To this end, while other super arbor reels add weight in order to gain speed, Force reels maintain their featherweight specification by being pure muscle and bone.Force SL II has an integrated foot, frame and drag cassette. The integration of the cassette to the frame and foot creates more strength and durability in the reel overall and less weight with fewer added parts.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltForce SL Series II Specs: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Force 1 SL Series II 3.80? 0.95? 2.82 oz 2,3,4 WF4 150 yds 20# Force 2 SL Series II 4.10? 1.00? 3.31 oz 5,6 WF6 125 yds 20# Force 3 SL Series II 4.40? 1.28? 3.70 oz 6,7,8 WF8 200 yds 20# |Fly Reels|219.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-waterworks-force-sl-series-ii-fly-reel?variant=25313424912 |LAMSON WATERWORKS FORCE SL SERIES II FLY REEL|The evolution of Force Superlight reels arrives with a new line storage format, enhanced CNC machined structural development and more fluid, refined styling. The Force reels have, since the introduction in 1997, pursued what we feel is the Holy Grail of fly reel performance: delivering the highest possible ratio of retrieve rate to reel weight. To this end, while other super arbor reels add weight in order to gain speed, Force reels maintain their featherweight specification by being pure muscle and bone.Force SL II has an integrated foot, frame and drag cassette. The integration of the cassette to the frame and foot creates more strength and durability in the reel overall and less weight with fewer added parts.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltForce SL Series II Specs: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Force 1 SL Series II 3.80? 0.95? 2.82 oz 2,3,4 WF4 150 yds 20# Force 2 SL Series II 4.10? 1.00? 3.31 oz 5,6 WF6 125 yds 20# Force 3 SL Series II 4.40? 1.28? 3.70 oz 6,7,8 WF8 200 yds 20# |Fly Reels|549.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-waterworks-force-sl-series-ii-fly-reel?variant=25313424976 |LAMSON WATERWORKS FORCE SL SERIES II FLY REEL|The evolution of Force Superlight reels arrives with a new line storage format, enhanced CNC machined structural development and more fluid, refined styling. The Force reels have, since the introduction in 1997, pursued what we feel is the Holy Grail of fly reel performance: delivering the highest possible ratio of retrieve rate to reel weight. To this end, while other super arbor reels add weight in order to gain speed, Force reels maintain their featherweight specification by being pure muscle and bone.Force SL II has an integrated foot, frame and drag cassette. The integration of the cassette to the frame and foot creates more strength and durability in the reel overall and less weight with fewer added parts.Features:Format: Large ArborMaterials: Machined 6061 Aluminum, Stainless SteelFinish: Hard AloxDrag: Sealed Conical Drag SystemUS Made, Idaho BuiltForce SL Series II Specs: MODEL DIAMETER WIDTH WEIGHT ROD WEIGHT LINE BACKING CAPACITY Force 1 SL Series II 3.80? 0.95? 2.82 oz 2,3,4 WF4 150 yds 20# Force 2 SL Series II 4.10? 1.00? 3.31 oz 5,6 WF6 125 yds 20# Force 3 SL Series II 4.40? 1.28? 3.70 oz 6,7,8 WF8 200 yds 20# |Fly Reels|249.95|//cdn.shopify.com/s/assets/no-image-100-c91dd4bdb56513f2cbf4fc15436ca35e9d4ecd014546c8d421b1aece861dfecf_small.gif|https://www.tcoflyfishing.com/products/lamson-waterworks-force-sl-series-ii-fly-reel?variant=25313425040